Need help?Do you have a question about the Pilz PSEN sc B 5 Series and is the answer not in the manual?
General| Number of OSSD pairs | 2 |
|---|---|
| Type | Type 3 |
| Resolution | 30 mm |
| Connection | M12 connector |
| Standards | EN ISO 13849-1 |
| Operating voltage | 24 V DC |
| Outputs | 2 safety outputs (OSSDs), 1 auxiliary output |
Explains the fundamental principle of the safety laser scanner's monitoring area.
Describes how to configure different safety zones and monitoring scenarios for machine states.
Details the automatic and monitored start/restart functions of the safety system.
Covers manual restart operations and the process for resetting the safety laser scanner.
Explains monitoring fixed hazardous areas and dividing them into subsections for control.
Covers multiple scan evaluation and provides practical examples of scanner applications.
Guidance on calculating and maintaining safe distances according to standards for protection.
Methodology for calculating the overall response time based on scanner and system parameters.
Details areas with limited detection and scanner installation considerations to ensure coverage.
Covers installing multiple scanners and environmental factors affecting performance.
Addresses interference from light sources, reflections, and proximity to walls.
Planning safety/warning zones and determining zone set switchover timing.
Explains dust filtration levels and their impact on safety distance calculations.
Overview of different methods for installing the safety laser scanner.
To Next Page
