Pilz PSEN sc B 5 Series - Appendix; Check List

Appendix
Operating Manual PSEN sc B 5 Series
1004508-EN-02
71
16 Appendix
16.1 Check list
The check list below is intended as an aid in for the following work on a safety laser scan-
ner of the PSEN sc B 5 Series:
} During commissioning,
} recommissioning, and
} running the specified regular check.
Note that the check list is not intended to replace the plant-specific safety analysis required
for commissioning/recommissioning, nor the resulting inspections and actions.
INFORMATION
Commissioning, recommissioning and regular inspection may only be car-
ried out by qualified personnel.
We recommend that you keep the completed check list and store it with the machine docu-
mentation for reference.
Action OK Not OK Notes
Check the category/standards
Does the category of the safety laser
scanner match the category required
for the plant/machine?
Have the standards applicable for the
plant/machine been considered?
Check ambient conditions for safety
laser scanner
Have the environmental conditions
been met (see
Ambient
conditions [ 23])?
Have the technical details been met for
all the safety laser scanner compon-
ents?
Check access points to the hazard-
ous area
Are all access points to the hazardous
area safeguarded either by safety laser
scanners or by mechanical safe-
guards?