Pilz PSEN sc B 5 Series - Power and Controller Connections

Wiring
Operating Manual PSEN sc B 5 Series
1004508-EN-02
41
7.3.4 Wiring configuration example D
8-pin socket at the safety
laser scanner
PIN Assignment Cable colour
24 V
0 V
PLC
7
2
6
5
24 V
0 V
OSSD 2
OSSD 1
3
4
1
8
PLC
PLC
2 24 VDC Brown
7 0 V DC Blue
3 Monitoring zone set 1 Green
4 Monitoring zone set 2 Yellow
1 Monitoring zone set 3 White
5 OSSD 1 Grey
6 OSSD 2 Pink
8 Functional earth Red
7.4 Connect supply voltage and safety controller
The connection for the supply voltage is underneath a memory module. The memory mod-
ule can be uninstalled for simpler connection.
1. Turn the safety laser scanner for better access to the memory module.
2. Loosen the M3 screws of the protective cover and remove the protective cover.
The screws are secured against loss and they cannot be removed.