Pilz PSEN sc B 5 Series - Page 42

Wiring
Operating Manual PSEN sc B 5 Series
1004508-EN-02
42
3. Loosen the M3 screws [2] of the memory module and pull out the memory module.
The screws are secured against loss and they cannot be removed.
[1]
[2]
Legend
[1] Protective membrane
[2] M3 screws for fixing the memory module
4. Connect the supply voltage and the safety controller to the 8-pin socket on the memory
module.
5. Remove the label [1] from the memory module and insert the memory module at the
safety laser scanner.
6. Fix the screw of the memory module with a torque of 1 Nm.
7. Place the protective cover at the safety laser scanner and screw the protective covers
with 1 Nm.