To Next PageTo Next Page
Need help?Do you have a question about the Pilz PSS SB 3006-3 Series and is the answer not in the manual?
General| Supply voltage | 24 V DC |
|---|---|
| Number of safe inputs | 6 |
| Number of safe outputs | 3 |
| Safety level | SIL 3, PL e |
| Response time | < 20 ms |
| Safety category | Category 4 |
| Connection type | Screw terminals |
| Protection class | IP20 |
Specifies the intended applications for the PSS SB2 3006-3 series safety systems.
Discusses safety system classification requirements according to EN 954-1.
Outlines critical safety guidelines and compliance with machinery directives.
Defines requirements for qualified personnel involved in system operation.
Describes the function and limitations of test pulse outputs T0 and T1.
Covers power supply selection, safety, and EMC considerations.
Shows how to connect the external power supply to systems without INTERBUS.
Details connecting power for systems with INTERBUS using a common supply.
Explains connecting power for systems with INTERBUS using separate supplies.
Emphasizes preventing hazardous conditions via proper wiring and earthing.
Details features, signal requirements, and isolation for digital inputs.
Describes the combined RS 232/RS 485 interface for programming devices.
Outlines the steps for installing, connecting, and powering up the system.
Describes system behavior and error detection for PSS and bus functionalities.
Provides instructions and warnings for replacing the system battery.
Lists electrical specifications including voltage, current, and power dissipation.
