Pilz PSS SB2 3006-3 ETH-2 User Manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra

Pilz PSS SB2 3006-3 ETH-2 Specifications

General

Brand	Pilz
Model	PSS SB2 3006-3 ETH-2
Category	Controller
Language	English

Summary

Overview of PSS SB2 3006-3 Series

Front Views of PSS Models

Illustrates and details the front panels of various PSS SB2 3006-3 models.

Safety Information for PSS Systems

Intended Use of PSS Systems

Defines the applications and usage scope for PSS SB2 3006-3 series.

Categories in Accordance with EN 954-1

Explains the importance of system-wide assessment for safety categories.

Safety Guidelines

Lists essential safety regulations and the need for safety assessment.

Use of Qualified Personnel

Defines the qualifications and training required for personnel operating the system.

Function Description of PSS Systems

CPU Functionality

Describes the function of the CPU, status display, and error indication.

System Interfaces

Details the available interfaces for CPU, SafetyBUS p, and standard bus systems.

Installation of PSS Systems

General Installation Requirements

Outlines essential conditions for installing the safety system in an enclosure.

Installing the Safety System

Installing in a Control Cabinet

Supply Voltage Requirements

General Requirements for Supply Voltage

Details requirements for selecting and connecting the power supply for the safety system.

Wiring Inputs and Test Pulse Outputs

Terminal Configuration and Connector Description

Notes on Wiring Inputs and Outputs

Emphasizes safety regarding short circuits, open circuits, and earthing.

Digital Inputs (DI2)

System Interfaces

General Interface Requirements

Programming Device Interface (“PG”)

Describes the combined RS 232/RS 485 interface for programming.

User Interface (“USER”)

Details the combined RS 232/RS 485 user interface.

SafetyBUS p Interface

Operation and Maintenance of PSS Systems

Commissioning Procedure

Outlines steps for installing, connecting, and powering up the system.

Faults and Troubleshooting

Describes fault handling for PSS and standard bus functionality, including error identification.

Display Elements and Status Indicators

Changing the Battery

Technical Details of PSS Systems

Electrical Data

CPU Specifications