Need help?Do you have a question about the Pilz PSEN sl-0.5n 1.1 and is the answer not in the manual?
General| Product type designation | PSEN sl-0.5n 1.1 |
|---|---|
| Category | 4 |
| Protection type | Type 4 |
| Resolution | 14 mm |
| Protected field height | 500 mm |
| Operating voltage | 24 V DC |
| Connection | M12 |
| Standards | EN 61496-1 |
| Product category | Safety Light Curtain |
| Outputs | 2 safety outputs |
Describes the intended application and safety function of the switch.
Covers compliance with standards and directives for safe operation.
Details requirements for competent personnel for installation and operation.
Critical safety warnings, including risk of life from manipulation.
Explains the internal logic and signal flow of the safety switch.
Explains requirements for evaluation devices and shows connection diagrams.
Details installation measures according to EN ISO 14119 to prevent circumvention.
Explains how to interpret error codes indicated by LED flashing patterns.
Provides SIL/PL values and compliance with safety standards.
To Next Page
