Need help?Do you have a question about the Pilz PNOZ m EF Multi Link and is the answer not in the manual?
General| Product type | Expansion module |
|---|---|
| Number of inputs | 0 |
| Number of outputs | 0 |
| Number of safe outputs | 0 |
| Number of safe inputs | 0 |
| Number of test outputs | 0 |
| Number of semiconductor outputs | 4 |
| Supply voltage | 24 V DC |
| Safety level | SIL CL 3, PL e, Cat. 4 |
| Connection type | Screw terminals |
| Protection type | IP20 |
| Rated voltage | 24 V DC |
| Max. current per semiconductor output | 0.5 A |
| Safety category | 4 |
| Protection class | IP20 |
| Standards | EN ISO 13849-1, IEC 61508 |
| Operating temperature | -20°C to +60°C |
| Ambient temperature | -20°C to +60°C |
Describes the primary application of the expansion module for connecting safe virtual I/O between base units.
Covers important safety standards and directives applicable to the product's use.
Emphasizes the need for a safety assessment according to the Machinery Directive before using the device.
Stresses that installation, operation, and maintenance must be performed by competent, trained personnel.
General safety advice to ensure safe operation and adherence to requirements.
Important warnings regarding manual usage, product modifications, and maintenance procedures.
Explains the built-in safety features like redundancy and self-monitoring for effective safety.
Provides instructions for mounting the unit in a control cabinet and on a mounting rail.
Details the wiring requirements, cable types, and connection terminals for the module.
Presents the Safety Integrity Level (SIL) and Performance Level (PL) ratings for safety functions.
To Next Page
