Pilz PSEN sl-0.5n 1.1 User Manual

PSEN sl-0.5n 1.1
Operating Manual PSEN sl-0.5n 1.1
22173-EN-05
13
The safety switch PSEN sl-0.5n 1.1 can be connected to Pilz evaluation devices, for ex-
ample.
Suitable Pilz evaluation devices are, for example:
} PNOZelog for safety gate monitoring
} PNOZpower for safety gate monitoring
} PNOZsigma for safety gate monitoring
} PNOZ X for safety gate monitoring
} PNOZmulti for safety gate monitoring
Configure the switch in the PNOZmulti Configurator with switch type 3.
} PSS for safety gate monitoring with standard function block SB064, SB066 or
FS_SafetyGate
The correct connection to the respective evaluation device is described in the operating
manual for the evaluation device. Make sure that the connection is made in accordance
with the specifications in the operating manual for the selected evaluation device.
The connections to two evaluation devices are shown on the following pages, by way of ex-
ample:
} PNOZ s3 and
} PNOZmulti
Connection example PNOZs3
PNOZ s3
PSENslock
0 V
24 V
A1
A2
S22
S12
A1
A2
S31
12
22
1
3
5
2
4

Pilz PSEN sl-0.5n 1.1 Specifications

General

Brand	Pilz
Model	PSEN sl-0.5n 1.1
Category	Controller
Language	English