Pilz PX 30 - Character Sets

PX 30 and PX 120 Operating Manual
7-7
Character Sets
IBM Character Set
The character set on the PX 30 and PX 120 corresponds to the extended ASCII character
set from IBM. Characters 00
H
to 1F
H
(0-31 decimal) are interpreted partly as special
control codes in the display's monitor mode (see section entitled "Control Codes" on
Pages 52 and 53). The character FF
H
(255 decimal) is used to identify an empty text
memory.
Characters from the IBM character set that can be represented are 20
H
to FE
H
(32 to 254
decimal); one exception is the character 35
D
(#) which is reserved as a variable marker.
Dec.
Hex.
Char.
Dec.
Hex.
Char.
Dec.
Hex.
Char.
Dec.
Hex.
Char.
Dec.
Hex.
Char.
Dec.
Hex.
Char.
Dec.
Char.
Hex.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com