Pima FORCE - 4.3 Disarming; 4.3.1 Disarming partitions

Arming and Disarming
PIMA Electronic Systems 13
4.3 Disarming
User Menu  Arming & Disarming  Disarming
To disarm the alarm system, enter the Master or authorized User code and press Disarm . If the
alarm system is not disarmed, the user may not have a disarming permission, or is out of its
disarming window of time (see section 7.1.1, on page 16).
4.3.1 Disarming partitions
When partitions are in use (see Partitioning , on page 25), a user can only disarm the partitions
it is allocated to. When disarming from a keypad, the user partitions will be disarmed only when
the keypad is allocated to the same partitions (when disarming using the PIMAlink app, there is
no such limit). For example: a user that is allocated to partitions no. 2, 3 and 4, disarms the
alarm system in a keypad that is allocated to partitions no. 1, 4, and 6. As a result, only
partition no. 4 will be disarmed, being the only partition that both the user and the keypad are
allocated to.