HUNTER-PRO 32 User Manual LED Keypads
18
after a minute of not receiving any command (Remote Control via Touch-tone
Phone on page 13).
NOTE:
In case a Voice-Unit with a recorded message is connected to the system, once the
call is picked-up, the system will play the recorded message and not a warning
sound.
The dialer aborts the dialing attempts in the following cases:
!
The system’s status changes from ON to OFF
!
A “Stop Dialer” command was received via telephone. The first Private
Dialer User that gives an ‘abort’ command causes the other Private Dialer
Users in the phone list to stop receiving the system’s report.
!
All Private Dialer Telephone Numbers have been dialed twice
Programming Telephone Numbers
It is possible to combine the process of entering/deleting/changing
programmed telephone numbers once in the Telephone Menu.
Master Code
(LED 6 constantly ON, LED 1 blinks)
Telephone
number no. 1
(LED 6 constantly ON, LED 2 blinks)
Telephone number
no. 2
(LED 6 constantly ON, LED 3 blinks)
Telephone number
no.3
(LED 6 constantly ON, LED 4 blinks)
Telephone number
no.4
to exit.
Deleting a Programmed Telephone Number
To delete a programmed telephone number, press the key instead of the
telephone number.
Chime
Programming the “Chime” feature enables to control opening/closing doors and
windows by activating the keypad’s buzzer for two seconds each time a
To Next Page
Loading...
