The Pineware 14L Water Heating Bucket, model PWB01, is an electrical appliance designed for household use, specifically for heating water. It is manufactured to ensure safety and reliability, and users are advised to read the instruction manual carefully before use and retain it for future reference.
Function Description:
The primary function of the Pineware PWB01 is to heat water. It operates as a water heating bucket, allowing users to heat water for various household needs. The appliance features a tap for dispensing hot water, and it is equipped with an automatic safety device for boil-dry protection.
Important Technical Specifications:
While specific wattage or voltage details are not explicitly listed in the provided text, the manual mentions that the appliance operates on a 230V wall socket. It is designed to operate on a stated current, and connecting it to other power sources may damage the appliance. The capacity of the bucket is 14 liters. The appliance uses a three-pin plug for connection to the mains supply, with wiring codes specified as Green/Yellow for Earth, Blue for Neutral, and Brown for Live.
Usage Features:
- Filling: To fill the bucket, the lid must be opened, and the power cord should not be attached. Cold water is then filled via the tap, ensuring the water level is never below the MINIMUM or above the MAXIMUM water level marks.
- Heating: After filling, the lid should be closed securely, and the cord plugged into the connector on the bucket. The cord is then plugged into a 230V wall socket, away from hot or heated surfaces. Switching on the wall socket switch initiates the heating process.
- Dispensing: Hot water can be accessed by placing a container under the tap and pressing/lifting the tap knob. Users are cautioned that hot water is dangerous.
- Boil-Dry Protection: The bucket is fitted with an automatic safety device that shuts off the unit if there is insufficient water, preventing overheating. If this occurs, the unit should be unplugged and allowed to cool before refilling with cold water.
- Manual Shut-off: The appliance does not have an automatic switch-off feature when the water boils. Users must manually switch off the wall socket switch once the water is boiling. It is crucial not to leave the water heating bucket unattended when boiling.
- Steam Safety: To avoid steam burns, the steam hole on the lid should be faced away from the user, ensuring steam does not come into contact with the plug and power outlet. The lid should not be opened while the bucket is in operation; the wall switch should be turned off first.
- Placement: The water heating bucket should always be operated on a dry, level, and firm surface. It is not intended for outdoor use. The cord should not hang over the edge of the work surface, nor should the appliance be placed on or near a hot gas burner, electric stove, or in a heated oven.
- Lid and Handles: Users are advised not to remove the lid when the bucket contains hot water to avoid scalding. Hot surfaces should not be touched; handles or knobs should be used instead.
- Safety for Children and Persons with Reduced Capabilities: Close supervision is necessary when the appliance is used by or near children. The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning its use by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
Maintenance Features:
- Cleaning Exterior: The unit should always be unplugged before cleaning. The exterior of the water heating bucket can be wiped with a clean, soft, and slightly damp cloth. Abrasive cleaning materials should not be used. The water heating bucket should NEVER be immersed in water or any other liquid.
- Cleaning Interior (Descaling): Depending on the water supply, the inside of the bucket may require regular descaling and cleaning using kettle cleaner/descalers available in supermarkets, chemists, and other stores. After descaling, the bucket should be boiled several times with fresh water before use.
- Storage: Before storing, the water heating bucket should be unplugged from the wall outlet and cleaned as instructed. It must be cool and dry inside. The appliance should be stored in a clean, dry place, and the power cord should not be wrapped around it.
- Servicing: There are no user-serviceable parts in this appliance. If the unit malfunctions, users should first check that instructions have been followed, the unit is wired correctly, the wall socket is switched on, mains power is ON, and the plug is firmly in the mains socket. If issues persist, the retailer should be consulted for repair or replacement. If the retailer cannot resolve the problem and the appliance needs to be returned, it should be packed carefully in its original packaging with proof of purchase and a reason for return.
- Cord and Plug Replacement: If the supply cord is damaged, it must be replaced by the manufacturer or an authorized service agent to avoid hazards. For warranty service, the appliance should be returned to an approved Tedelex Trading (Pty) Limited service center. Out-of-warranty service is available but chargeable. Instructions for changing the three-pin plug are provided, detailing the wiring color codes (Green/Yellow for Earth, Blue for Neutral, Brown for Live) and emphasizing that the appliance must be earthed.
The manual also includes a warranty section, outlining the terms and conditions of the 1-year warranty provided by Tedelex Trading (Pty) Limited, covering defects in quality and workmanship under normal personal, family, or household use. It specifies conditions for claims, returns, and responsibilities for costs related to packaging. Contact numbers for Tedelex Trading (Pty) Ltd in Johannesburg, Cape Town, and Durban are provided, along with the website www.pineware.co.za.
Need help?
General
To Next Page