Need help?Do you have a question about the PIONEER DJ DJM-S11 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Sampling Rate | 96 kHz |
| A/D Converter | 24-bit |
| D/A Converter | 24-bit |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (USB) | 0.003% |
| Total Harmonic Distortion (Line) | 0.005% |
| Sampler | Yes |
| MIDI | Yes |
| Type | Digital Mixer |
| EQ/ISO | 3-band EQ |
| Inputs | 2 Phono (RCA) |
| Outputs | 1 (Booth) |
| USB Ports | 2 |
| Display | LCD |
| DVS Control | Yes |
| Sound Color FX | Yes |
| Beat FX | Yes |
| Power Supply | AC 100-240 V |
Details Serato DJ Pro software, its compatibility, and download information.
Explains rekordbox software, its functions, and download information.
Explains the components of the waveform screen on the touch display.
Instructions for installing essential driver software and Setting Utility for PC/Mac.
Provides notes on installation and steps for downloading and installing the dedicated software.
Explains how to launch and use the Setting Utility for PC/Mac connection management.
Guides users on configuring audio output settings from the unit to a PC/Mac.
Details how to adjust buffer size in the ASIO tab for optimal audio performance.
Explains the various audio output options available in the pull-down list.
Details how to connect various audio sources to the unit's input terminals.
Guides on connecting audio outputs like master and booth to external devices.
Explains how to connect multi players or controllers to the unit for software control.
Explains the concept of DVS and how to connect turntables or multi players.
Provides a step-by-step guide for connecting turntables for DVS.
Provides a step-by-step guide for connecting multi players for DVS.
Details the SETUP screen configuration for Serato DJ Pro with DVS.
Guides on selecting turntables or CDJs and checking control signals in Serato DJ Pro.
Explains how to add music files and folders to the library using Serato DJ Pro.
Explains the input selector, TRIM, EQ, fader, and crossfader functions for each channel.
Provides step-by-step instructions for adjusting input and output volumes.
Provides steps for connecting a microphone, setting level, and adjusting EQ.
Guides on selecting effects, setting BPM, and adjusting effect parameters.
Explains how to set, call up, and delete Hot Cues using Performance Pads.
Details how to control track playback, pitch, and sync using Performance Pads.
Explains how to assign DJ software functions to Performance Pads using User modes.
Explains how to enable and use Fader Start via Setting Utility or unit settings.
Details the process of setting a cue and using the channel fader for playback start.
Guides on setting a cue and using the crossfader for playback start.
Explains how to control decks 3 and 4 in DJ software from the unit.
Explains how to control MIDI compatible software using the unit's touch screen.
Guides on accessing and changing unit settings via the Utility menu.
Lists and describes crossfader, loop, and pad mode options in the utility menu.
Details talkover, low cut, and mic output settings for the microphone.
Covers phono attenuation, isolator/EQ, and AUX input level settings.
Details peak limiter, attenuation level, and mono/stereo settings for master output.
Details attenuation level and mono/stereo settings for booth output.
Describes how to restore the unit to its factory default settings.
Provides guidance on troubleshooting common issues and where to find support.
To Next Page