Need help?Do you have a question about the PIONEER DJ DJM-V10 and is the answer not in the manual?
General| Channels | 6 |
|---|---|
| Sampling Rate | 96 kHz |
| A/D Converter | 24-bit |
| D/A Converter | 24-bit |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | 0.005 % (Line) |
| Power Supply | AC 100-240V, 50/60Hz |
| Inputs | Line x 6 (RCA), Phono x 4 (RCA), Mic x 2 |
| Outputs | Master, Booth |
| EQ | 3-band |
| Effects | Built-in effects |
| USB | USB |
| Signal-to-Noise Ratio | 113 dB (Line) |
| Display | OLED |
Identifies the various controls and connectors on the top surface of the mixer.
Identifies the controls and connectors located on the front panel of the mixer.
Details the terminals and connections available on the rear of the DJ mixer.
Explains the need to install dedicated audio driver software for PC/Mac connectivity.
Provides notes and step-by-step instructions for installing the audio driver software.
Introduces the utility for checking and setting PC/Mac connections and audio.
Guides on configuring audio output from the mixer to a PC/Mac using the utility.
Explains how to adjust buffer size for optimal performance in Windows ASIO.
Illustrates connections to various input terminals like PHONO, LINE, and MIC.
Details connecting output terminals like MASTER, BOOTH, and REC OUT to devices.
Explains how to connect external FX units using EXT1 and EXT2 SEND/RETURN terminals.
Details connecting external FX units or mobile devices via MULTI I/O terminals.
Outlines procedures for outputting sound, adjusting input/output volume, and crossfader.
Explains the controls and functions of the MASTER ISOLATOR for master sound adjustment.
Details how to turn on and use the MASTER ISOLATOR to adjust master sound.
Describes the controls for headphone monitoring sections, including CUE buttons and MIX knob.
Guides on connecting headphones and selecting monitoring sources and levels.
Details touch display elements for BEAT FX: AUTO/TAP, QUANTIZE, BPM, and X-PAD.
Offers solutions for common issues like power, audio output, and distorted sound.
Addresses issues with BEAT FX, SEND effects, and MULTI I/O functionality.
Covers problems with MIDI control and PC/Mac connectivity.
To Next Page
