Need help?Do you have a question about the PIONEER DJ SERATO DDJ-REV7 and is the answer not in the manual?
General| Type | DJ Controller |
|---|---|
| Compatibility | Serato DJ Pro |
| Decks | 2 |
| Channels | 2 |
| Motorized Platters | Yes |
| Crossfader | Yes |
| Microphone Inputs | 1 |
| Built-in Effects | Yes |
| Built-in Sound Card | Yes |
| Power Supply | AC adapter |
| Software | Serato DJ Pro |
| Pads | 16 Performance Pads (8 per deck) |
| EQ | 3-band |
| Outputs | RCA, XLR |
| Headphones | 1/4-inch and 1/8-inch headphone output |
| USB | USB |
| Jog Wheel | 7-inch Motorized Jog Wheels with On Jog Display |
| Inputs | RCA, XLR |
Explains the structure and conventions of the user manual.
Explains the manual's conventions, button notations, and display differences.
Lists the included accessories and components with the DJ controller.
Provides a reference to the detailed manual for Serato DJ Pro software.
Introduces Serato DJ Pro and its system requirements for use with the unit.
Step-by-step guide for installing Serato DJ Pro software on macOS systems.
Step-by-step guide for installing Serato DJ Pro software on Windows systems.
Detailed steps required to activate the Pitch 'n Time DJ feature via the Serato interface.
Identifies and describes the controls and features on the top surface of the unit.
Identifies and describes the controls and connectors on the front panel.
Identifies and describes the connectors and ports on the rear panel.
Explains the elements displayed in Waveform Mode on the jog wheel.
Explains the elements displayed in Virtual Deck Mode on the jog wheel.
Explains the elements displayed in Artwork Display Mode on the jog wheel.
Explains the elements displayed in DJ Logo Display Mode on the jog wheel.
Important preliminary steps and precautions before installing software on PC/Mac.
Procedures for downloading and installing the dedicated software for PC/Mac.
Instructions on how to launch and use the Setting Utility for configuration.
Setting the audio data output from the unit to a PC/Mac.
Adjusting the buffer size for optimal performance in Windows ASIO.
Changing the effects assigned to the unit's filter knobs and FX SELECT buttons.
Modifying various operational settings via the Preference tab.
How to check the firmware and dedicated software versions of the unit.
Guidance on connecting turntables, DJ players, and microphones to input terminals.
Instructions for utilizing the cord hook to secure the AC adapter cable.
Guidance on connecting speakers and headphones to the unit's output terminals.
A sequential guide for connecting the unit, PC/Mac, and other devices.
Steps to open and start the Serato DJ Pro software application.
Basic method for importing audio files into the Serato DJ Pro library.
Using the rotary selector and back button to navigate the Serato DJ Pro library.
Procedures for selecting and loading a track onto a specific deck.
Identifies the main controls for managing track playback on each deck.
Controls for starting, pausing, and playing tracks in reverse.
Using the tempo slider to adjust track playback speed.
Adjusting playback speed while maintaining the original pitch of the track.
Utilizing the jog wheel for scratching and track skipping functions.
Adjusting the duration for playback to stop after pressing the START/STOP button.
Synchronizing BPM and beat position between tracks on different decks.
Automatically matching the keys of tracks for harmonic mixing.
Details the buttons used for initiating and managing loops.
Instructions on how to set loops automatically or manually within a track.
Adjusting the precise start and end points of a loop.
Identifies the parameter and pad mode buttons for performance pad functions.
How to set, trigger, and clear Hot Cues using the pads.
Creating loop rolls by pressing performance pads with assigned beat lengths.
Saving and recalling previously created loops from loop slots.
Loading and playing samples from sampler slots using performance pads.
Utilizing Pitch 'n Time DJ to trigger Hot Cues at different pitches.
Creating and playing loops from divided track segments using performance pads.
Recording, saving, and playing sequences of Hot Cues (Flips).
Loading and playing pre-recorded scratch sounds from scratch banks.
Using the deck pads to set, trigger, and clear Hot Cues.
Using the deck pads to load and play scratch sounds.
Using the deck pads to recall saved loops.
Using the deck pads to load and play samples.
Explains how Slip mode affects pause, braking, scratching, loops, and hot cues.
Instructions on how to turn Slip mode on and off.
Introduces Instant Scratch and lists fixed functions when it's active.
Steps to activate Instant Scratch mode and play scratch sounds.
Identifies controls for channel and master output adjustments.
Details input selection, EQ, trim, faders, and indicators for each channel.
Details master level adjustment and the clip indicator.
Adjusting the input volume for individual channels.
Adjusting channel output volume and balance using faders and crossfader.
Adjusting the overall master sound volume using the master level knob.
Adjusting channel EQ and setting the channel fader curve.
Adjusting the channel fader curve and reverse function.
Controls for crossfader reverse, weight, and curve settings.
Setting the crossfader curve and adjusting its "weight".
Controls for headphone output level, mix balance, and cue fader.
Step-by-step guide for monitoring audio through headphones.
Controls for adjusting the output volume to booth monitors.
Connecting and adjusting the volume for booth monitor output.
Overview of microphone input controls including level, EQ, and talkover.
Connecting a microphone and adjusting its input level and EQ.
Applying an echo effect to the microphone input sound.
Mixing sounds from external devices directly without a PC/Mac.
Connecting and adjusting input levels for AUX devices.
Using the FILTER knob to adjust filter or effect parameters.
Details on available filter effects like FILTER, DUB ECHO, and NOISE.
Overview of effect buttons, levers, and the effects section display.
Explains the components of the effects section display.
Steps to select, apply, and synchronize Beat FX and software effects.
Descriptions and parameters for Beat FX like ECHO, TIME SWEEP ECHO, DUCKING ECHO.
Notes on limitations when using FX Banks with multiple computers.
Applying Beat FX using performance pads without a PC/Mac connection.
Overview of the Smooth Echo ON button and its function.
Steps to apply the echo effect using the Smooth Echo feature.
Navigating the settings menu and modifying items using the rotary selector.
Details of utility settings related to echo, MIC, and channel functions.
Utility settings for auto standby, talkover, MIC, and headphone output.
Utility settings for master output, booth output, display brightness, and slip flashing.
Settings for the auto standby function and slip button indicator behavior.
Explains the ADVANCED and NORMAL modes for microphone talkover.
Instructions for replacing slip sheets to adjust the weight for scratching.
How to configure MIDI settings to control DJ software via the unit.
Technical details of the AC adapter and the main unit's general specifications.
Technical specifications related to the unit's audio sampling rate, frequency, and S/N ratio.
Details on terminal types and specifications of the external power supply.
Visual representation of the signal paths and processing within the unit.
General troubleshooting advice and reference to online FAQs.
Solutions for problems related to audio output, volume, and sound distortion.
Steps to resolve issues when Serato DJ Pro is unstable or not functioning correctly.
Solutions for problems with track display in the library and on jog display.
Fixes for issues with BPM, beatgrid, jog wheel rotation, and playback interruptions.
Solutions for problems with beatgrid, Slicer Loop, and Jog Skip functionality.
Addressing blinking indicators and general unit errors requiring service.
Information on normal phenomena that may appear on the LCD display.
Guidelines for cleaning the unit using a dry soft cloth.
List of registered trademarks and company names mentioned in the manual.
Details regarding the Apache and BSD licenses applicable to the software.
Important notes on copyright laws concerning music recordings and downloads.
To Next Page