Need help?Do you have a question about the Pioneer A-9 and is the answer not in the manual?
Details on continuous power output, distortion, sensitivity, impedance, and frequency response of the amplifier.
Covers power requirements, consumption, dimensions, weight, and furnished parts.
Lists parts for the exterior of the unit with corresponding mark numbers and part numbers.
Procedure for adjusting the power amplifier section, including voltage calibration and indicator settings.
Procedure for adjusting the DC balance of the MC and EQ amplifier sections.
Details on continuous power output, distortion, sensitivity, impedance, and frequency response of the amplifier.
Covers power requirements, consumption, dimensions, weight, and furnished parts.
Lists parts for the exterior of the unit with corresponding mark numbers and part numbers.
Procedure for adjusting the power amplifier section, including voltage calibration and indicator settings.
Procedure for adjusting the DC balance of the MC and EQ amplifier sections.
General| Power Output | 60 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency Response | 5Hz to 100kHz |
| Total Harmonic Distortion | 0.007% |
| Signal-to-Noise Ratio | 86dB (MM), 108dB (line) |
| Input sensitivity | 0.17mV (MC), 2.5mV (MM), 150mV (line) |
| Dimensions | 420 x 132 x 370mm |
| Weight | 9.7kg |
| Speaker load impedance | 4-16 Ω |
To Next Page
