To Next PageTo Next Page
Need help?Do you have a question about the Pioneer A-Z570 and is the answer not in the manual?
General| Frequency response | 10Hz - 100kHz |
|---|---|
| Total harmonic distortion | 0.7% |
| Weight | 9.5 kg |
| Input sensitivity | 150mV |
| Signal to noise ratio | 80dB |
| Speaker load impedance | 6 ohms |
| Amplifier Section | 100W per channel (at 6 ohms, 1kHz, THD 0.7%) |
| Input Sensitivity/Impedance | 150mV |
| Signal-to-Noise Ratio | 80dB |
| Power Supply | AC 220-230V, 50/60Hz |
| Dimensions (W x H x D) | 420 x 148 x 360 mm |
Information regarding moisture formation inside the unit due to temperature changes.
Warning about turntable vibration affecting sound quality and amplifier heat dissipation.
Step-by-step instructions for setting up the turntable, including parts check and belt installation.
Overview of system component connections and connection diagram for basic setup.
Instructions for attaching and installing FM antennas, including grounding.
Explains the automatic adjustment of bias, level, and equalization for tape recording.
Explains the Auto Synchro Editing System (A.S.E.S.) operation for recording from CD.
Explains various buttons for controlling sound field effects, display, and modes.
Guide on setting the 24-hour clock for the tuner, including examples.
Instructions for tuning into radio stations using auto and manual methods.
Steps for storing preferred radio stations using the station call buttons.
Step-by-step guide for playing records on the PL-Z470 turntable.
Explains the function of Dolby NR systems for reducing tape hiss.
Instructions for auto and manual playback on the PL-Z570 turntable.
Details the Dolby HX Pro system for controlling bias current during recording.
Guide on playing cassette tapes, including Dolby NR and REV MODE settings.
Detailed steps for recording onto cassette tapes, including Dolby NR and REV MODE.
Instructions for simultaneous recording on both decks using the CT-Z570WR.
Explains how deck II starts recording when deck I finishes recording.
Explains the benefits and features of the Automatic Bias, Level, Equalization system.
Step-by-step guide for operating the AUTO BLE function for tape recording.
Instructions for duplicating recorded tape content from one tape to another.
Explains how deck II starts recording when deck I finishes recording.
Explanation of how sound field control enhances audio experience by simulating environments.
Guide on using the sound field controls in automatic mode with the SOUND JOG dial.
Instructions for relay recording with CD auto eject function.
Step-by-step guide for mixing microphone and tape signals.
Instructions for recording mixed microphone and source signals.
Instructions for cleaning the tape head, capstan, and pinch roller.
Steps for demagnetizing the recording/playback head.
Guide on how to safely remove and replace the turntable stylus.
