19
Displaying the “Radio settings”
screen
1 Press .
2 Touch , and then .
3 Touch [AV Source Settings].
4 Touch [Radio settings].
Tuning into strong frequencies
p You can use this function when “Radio” is selected as the
source.
Local seek tuning allows you to only tune into those radio sta-
tions with sufficiently strong signals.
1 Display the “Radio settings” screen.
Displaying the “Radio settings” screen on page 18
2 Touch [Local].
3 Touch the item you want to set.
● Off (default):
Turns the seek tuning setting off.
●
Level1 to Level4:
Sets the level of sensitivity for FM to Level1 to Level4 (for
AM Level1 or Level2).
p
The FM “Level4” (AM “Level2”) setting allows reception of
only stations with the strongest signals.
Setting the FM or AM tuning
step
You can switch the tuning step for FM or AM band.
p
For FM band, the seek tuning step is fixed to 50 kHz.
1 Turn the source off.
Source on the AV source selection screen on page 11
2 Display the “Radio settings” screen.
Displaying the “Radio settings” screen on page 18
3 Touch [FM Step] or [AM Step] to switch the
tuning step.
The following items are available for each setting:
FM Step
●
100 kHz(default)
●
50 kHz
AM Step
●
9 kHz (default)
●
10 kHz
Setting the alternative fre-
quency search
When the tuner cannot get a good reception, tunes to another
broadcast station that supports the same program in the current
network.
1 Display the “Radio settings” screen.
Displaying the “Radio settings” screen on page 18
2 Touch [Alternative FREQ] to switch “On” or
“Off” (default).
Setting the Auto PI search
When you switch to the broadcast station containing RDS data,
searches for the same PI (Program Identification) code broad-
cast station from all frequency band automatically.
1 Display the “Radio settings” screen.
Displaying the “Radio settings” screen on page 18
2 Touch [Auto PI] to switch “On” or “Off”
(default).
p Even if you set to “Off”, the PI search is automatically per-
formed when the tuner cannot get a good reception.
Limiting stations to regional
programing
You can switch whether the area code is checked during the
auto PI search.
1 Display the “Radio settings” screen.
Displaying the “Radio settings” screen on page 18
2 Touch [Regional] to switch “On” (default) or
“Off”.
Receiving trafc announce-
ments (TA)
The traffic announcement can be received from the last selected
frequency, interrupting the other sources.
1 Display the “Radio settings” screen.
Displaying the “Radio settings” screen on page 18
2 Touch [TA Interrupt] to switch “On” or “Off”
(default).
Receiving news announcements
The news can be received from the last selected frequency, inter-
rupting the other sources.
1 Display the “Radio settings” screen.
Displaying the “Radio settings” screen on page 18
2 Touch [News Interrupt] to switch “On” or “Off”
(default).
Receiving alarm broadcasts
The alarm broadcast can be received from the last selected
frequency, interrupting the other sources.
1 Display the “Radio settings” screen.
Displaying the “Radio settings” screen on page 18
2 Touch [Alarm Interrupt] to switch “On”
(default) or “Off”.
TV tuner
TV
005
CH
Full
4821
6/10
abcdefghi
abcdefghi
abcdefghi
abcdefghi
abcdefghi
abcdefghi
1/3
Menu
1
2
3
4
5
6
Switches the preset channels
upward or downward.
Hides the tuner control keys.
To display again the keys, touch
anywhere on the screen.
Recalls the preset channel.
Displays the TV tuner menu.
p By pressing or , you can also switch the preset
channels.
p
Changing the wide screen mode.
Common operations on page 44
You can control a TV tuner, such as GEX-1550TV (sold separately).
The following description is differ from the TV tuner opera-
tion manual.
Starting procedure
1 Display the “AV source selection” screen.
2 Touch [TV].
The “TV” screen appears.
Storing stations
This function stores stations automatically.
< CRD4823-A >
Radio
19
To Next Page
Loading...
Need help?
General
