Pioneer BDP-09FD User Manual

32
BDP-09FD
1
2 3 4
A
B
C
D
E
F
1
2 3 4
5.2 TROUBLE SHOOTING
NO
YES
NO
YES
NO
YES
NO
YES
* Perform the settings on the unit as follows:
[Audio output]-[Output connector]: Analog audio
[Speakers]-[Audio output mode]: Multichannel
NG
OK
* Before the operation check, be sure to activate the KURO LINK function on
all connected equipment.
NG
OK
*Perform the setting on the unit as follows:
[Audio output]-[Output connector]: HDMI MAIN
• Check the power ON sequence.
• Check in the log that the model number of the drive has been recognized.
Example: “PIONEER BD-** BDV-****, ATAPI CD/DVD-ROM drive”
If it is not recognized, check the power for the SPATA and ATA signals.
• According to the descriptions on the video block, check the power to
the relevant IC and for the reset/clock signals.
Playback of a
Blu-ray disc
• Check that the ID No. and destination are set properly.
• Check that the drive operates properly.
• If an audio signal is not output from any of the analog audio connectors:
Check that power for each is supplied from AUPW to AUJB.
Also check the MCLK, BCK, and LRCK input signals between the MAIN and
AUJB Assys.
• If an audio signal is not output from a particular analog audio connector:
Check the ADATA0-3 input signals between the MAIN and AUJB Assys.
Check the digital input and analog output signals to/from the corresponding
DAC.
• Check that interlocked HDMI power On/Off functions properly.
If it does not function, check the signal between Pin 19 of the HDMI (MAIN)
connector and Pin 23 of IC4001.
• If the LEDs and video outputs cannot be turned on and off:
Check that the KEY0 signal between the MAIN and FLKY Assys responds to
pressing of the PureAudio key.
• If the audio power cannot be turned on and off: Check switching of the 12-V
power supply and RY_ON signal between the MAIN and ACSW Assys.
“NO DISC” is
displayed on
the FL display.
Video
output from
each
connector
PureAudio
On/Off
operation
* Check that the LEDs, video
outputs, and audio power
relay can be turned on or
off.
Check that “PQLS” is lit on
the FL display.
Audio output
from each
analog audio
connector
Perform an HDMI
connection with a
corresponding
amplifier. Play back
a CD and perform
PQLS operations.
Normal operationNormal operation
Power ONPower ONPower ON
Nor
mal operation

Pioneer BDP-09FD Specifications

General

Brand	Pioneer
Model	BDP-09FD
Category	Blu-ray Player
Language	English