To Next PageTo Next PageWhy doesn't the KURO LINK indicator light up on my Pioneer BDP-120 Blu-ray Player?
If the KURO LINK indicator on your Pioneer Blu-ray Player does not light up, connect to a KURO LINK-compatible Pioneer Flat Screen TV using an HDMI cable. Set KURO LINK to On on the Flat Screen TV and set “Settings” – “KURO LINK” on the player to “Yes.” Also, check that the player’s picture is being output to the Flat Screen TV.
How to fix a Pioneer Blu-ray Player remote that is not working?
If your Pioneer Blu-ray Player remote control isn't working, try these solutions: * Ensure you are using the remote within its operating range. * Replace the batteries with new ones.
How to troubleshoot no picture on Pioneer Blu-ray Player?
If you're not getting a picture from your Pioneer Blu-ray Player, make sure the cables are connected correctly. Also, ensure that the connected TV or AV receiver is set to the correct input. Try taking out the disc and cleaning it. Verify that the region code on the disc matches that of your player. Check the settings for the HDMI and component video outputs to ensure they are correctly configured.
Why does my Pioneer BDP-120 Blu-ray Player automatically eject the disc?
If the disc is automatically ejected after closing the disc tray on your Pioneer Blu-ray Player, make sure the disc is loaded properly (aligned in disc tray and label-side up). Also, take out the disc and clean it. Verify that the region code on the disc matches that of your player and that the disc is playable.
Why does my Pioneer Blu-ray Player turn on by itself?
If the Pioneer Blu-ray Player's power is turning on automatically, it may be because “Settings” – “KURO LINK” is set to “Yes” on the player. With this setting, the player’s power may turn on when the connected TV is operated.
How to turn on a Pioneer Blu-ray Player that won't power on?
If your Pioneer Blu-ray Player is not turning on, ensure the power cord is firmly plugged into the AC outlet. When plugged in, press and hold the STANDBY/ON button on the player until “ ” appears on the front panel display. After the STANDBY/ON indicator lights up, press the STANDBY/ON button again to turn on the power.
Why does my Pioneer BDP-120 power turn off automatically?
If the Pioneer Blu-ray Player's power is turning off automatically, it could be due to these reasons: * The “Auto Power Off” feature is set to “Yes,” which automatically turns off the power after 10 minutes of inactivity. * The “KURO LINK” setting is set to “Yes,” and the power of the connected TV is turned off.
Why does my Pioneer BDP-120 turn on automatically?
If your Pioneer Blu-ray Player turns on automatically, it might be because 'KURO LINK' is set to 'Yes'. This setting can cause the player to power on when the connected TV is operated.
Why does my Pioneer BDP-120 turn off automatically?
Your Pioneer Blu-ray Player might be turning off automatically because either 'Auto Power Off' is set to 'Yes', in which case the power will turn off after 10 minutes of inactivity, or 'KURO LINK' is set to 'Yes', and the player's power turns off when the connected TV is turned off.
Why is KURO LINK not working on my Pioneer Blu-ray Player?
If the KURO LINK function on your Pioneer Blu-ray Player isn't working, ensure the HDMI cable is properly connected. Use High-Speed HDMI™ cables for the KURO LINK function. Set “Settings” – “KURO LINK” on the player to “Yes.” Note that the KURO LINK function does not work with devices of other brands, even if connected via HDMI. Also, ensure KURO LINK is enabled on the connected device and that the player’s picture is properly output to the Flat Screen TV. The KURO LINK function may not work if three or more players, including this player, are connected.
Power| power requirements | 120 V 60 Hz |
|---|
Weight and Dimensions| product weight | 6 lbs. 10 oz. (3 kg) |
|---|---|
| width | 16-9/16 inches (420 mm) |
| height | 2-15/16 inches (58 mm) |
| depth | 10-9/16 inches (268 mm) |
