1. [1] Enter FA mode
In "FA mode," playback of the pick-up area is adjusted first, and then playback verification process
is done on all playable discs. Adjustments on initial playback need to be made when exchanging
the Loader and MAIN BOARD ASSY in Service, so implement "FA mode" as in the following instructions.
1
Select "[1]Enter FA mode" with the up-and-down key on the remote control on the Service Mode screen
and press the [ENTER] key. (Window below will appear)
2
The tray will open automatically, so insert GGV1368 and close the tray manually (push the tray in)
3
Adjustments will initiate, and when they are properly completed, the tray will re-open and
[Insert Disc: BD-R DL] will appear.
4
Remove the disc from the tray and press the [Stop] key. You will exit Service Mode
and return to the Home Menu screen and finish.
To Next Page
Loading...
