Need help?Do you have a question about the Pioneer CT-656 and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Total Harmonic Distortion (THD) | 0.05% |
| Input Sensitivity | 150 mV (line) |
| Power Output | 60 W per channel (8 ohms) |
| Frequency Response | 20 Hz - 20 kHz |
Details on connecting input/output cords using colored pin plugs for left and right channels.
Instructions on setting up and performing repeat playback of a cassette side.
Guidance on setting the optimal recording level for good sound quality.
How to adjust the balance between left and right channel recording levels.
Explanation of the peak hold function for monitoring maximum levels during recording setup.
How to adjust tape bias for optimal recording with different tape types and sources.
Explanation of Dolby NR systems (B and C types) for reducing tape hiss and improving dynamic range.
Explanation of the Dolby HX PRO system for optimizing high-frequency recording levels.
Procedure for cleaning tape heads, capstan, and pinch rollers with cleaning fluid.
To Next Page
