Need help?Do you have a question about the Pioneer CT-95 and is the answer not in the manual?
General| Type | Cassette Deck |
|---|---|
| Track System | 4-Track, 2-Channel Stereo |
| Total Harmonic Distortion | 0.5% |
| Outputs | Line, Headphones |
| Tape Speed | 4.75 cm/s |
| Tape Type | Metal |
| Frequency Response | 20 Hz to 20 kHz |
| Input | Line In |
| Inputs | Line |
| Heads | 2 (Playback/Recording), 1 (Erase) |
| Motor | 3 (Capstan, Reel, Mechanism) |
| Wow and Flutter | 0.022% (WRMS) |
Guidance on grounding outdoor antennas for safety and protection.
How to handle condensation when moving the unit between different temperatures.
Important precautions regarding the handling and care of the power cord.
Detailed steps for cleaning the tape path components.
Procedure to demagnetize heads to maintain sound quality.
How to clean the exterior panel of the unit.
Checks to perform on a cassette tape before loading it into the deck.
How the deck automatically detects tape type for optimal recording.
Advice on using different types of cassette tapes and potential issues.
How to connect the RCA cables for recording and playback.
Instructions for connecting and using the CD sync recording feature.
How to connect and use the system remote control.
Instructions for connecting the power cord to the unit.
Covers Power, Timer, Open/Close, Tape Return, Display Off, and core Operation buttons.
Covers SUPER AUTO BLE, BIAS buttons, Monitor Selector, REC LEVEL, REC BALANCE.
Explains Dolby NR systems (B, C, S), HX PRO, and MPX Filter functions.
Explains the function and meaning of various indicators on the display.
How to set and display the remaining tape time.
How the tape counter works and its use for locating sections.
How the time counter displays elapsed recording/playback duration.
How to pause playback and resume it.
How to completely stop playback.
How to set up and perform repeat playback of a tape.
How to use the tape return function to find the '0000' counter position.
How to search for specific tracks on a tape.
How the music search function counts selections for searching.
Warning about erasure prevention tabs and their effect on recording.
How to cancel the AUTO BLE tuning process.
How to reset the AUTO BLE tuning settings.
Information on error messages during AUTO BLE tuning.
Guidance on adjusting the recording level using the REC LEVEL control.
Detailed procedure for setting recording levels using peak calibration.
How to adjust the recording bias using the BIAS buttons for optimal sound.
How to create silent gaps for music search using the recording mute function.
Explains the displays shown during the AUTO BLE tuning process.
List of settings retained by the last memory function.
Instructions to reset stored memory settings to factory defaults.
Instructions for setting up unattended recording with an audio timer.
How to set up and perform playback that starts automatically at a set time.
Detailed technical specs including frequency response, S/N ratio, distortion, inputs, and outputs.
Lists the various subfunctions and features of the cassette deck.
Technical specifications for models CT-43, CT-S820S, and CT-S620.
Lists the various subfunctions and features of these models.
To Next Page
