What to do if subfolders cannot be played when FLD (folder repeat) is selected on Pioneer DEH-1320MP Car Receiver?
When FLD (folder repeat) is selected, subfolders cannot be played. Please, perform operation again.
Why does the repeat play range change unexpectedly on my Pioneer DEH-1320MP?
The repeat play range on your Pioneer Car Receiver might change unexpectedly because, depending on the repeat play range, the selected range may change when selecting another folder or track, or when fast forwarding/reversing. Try selecting another repeat play range.
Covers important safety warnings, cautions, and procedures for product disposal.
Guides on tuning bands, manual tuning, seeking stations, and memory storage.
Details RDS display, PTY list, alternative frequencies, PI Seek, and traffic announcements.
Guides on fader/balance, equalizer, loudness, and source level adjustments.
Details vehicle requirements, ignition switch connections, and speaker specifications.
Guides on diagnosing and resolving common display and operational problems.
Lists error messages, their causes, and recommended actions for resolution.
Details supported file formats (WMA, MP3, WAV) and their specifications.
Lists detailed technical specifications for audio, tuners, and player components.
General| DIN Size | Single DIN |
|---|---|
| Channels | 4 |
| Tuner Type | AM/FM |
| CD Playback | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| USB Port | Yes |
| Auxiliary Input | Yes |
| Sub Preamp Output | No |
| Display Type | LCD |
| Bluetooth | No |
| Radio Data System (RDS) | Yes |
| CD-R Playback | Yes |
| CD-RW Playback | Yes |
| Detachable Face | Yes |
| ID3 Tag Display | Yes |
| Presets | 24 |
| Max Power Output | 50W x 4 |
| RMS Power Output | 22 Watts x 4 |
| Preamp Voltage | 2V |
| Dimensions | 178mm x 50mm x 159mm |
To Next Page
