Need help?Do you have a question about the Pioneer DEH-30MP and is the answer not in the manual?
General| Brand | Pioneer |
|---|---|
| Model | DEH-30MP |
| Category | Car Receiver |
| Language | English |
Provides basic information about the tuner frequencies and RDS function usage.
Explains the purpose of the operation manual and recommends reading it.
Instructs users on what to do if the product fails to operate properly.
Lists supported playback formats including CD, MP3, WMA, and WAV files.
Explains what WMA stands for and its origin from Microsoft.
Directs users to the website for product registration.
Details how to detach and store the front panel to prevent theft.
Identifies and describes the function of each button on the main unit.
Identifies and describes the function of buttons on the optional remote control.
Explains the procedure to turn the unit on by selecting a source.
Details how to cycle through and select available audio sources.
Describes the method to turn the unit off by pressing and holding the SOURCE button.
Covers basic steps for operating the radio, including band selection and tuning.
Explains advanced functions like BSM, REG, LOCAL, TA, and AF.
Describes how to store and recall up to six broadcast frequencies using preset buttons.
Explains how to use local seek tuning to tune into strong radio stations.
Details the Best Stations Memory (BSM) function to automatically store the six strongest stations.
Explains RDS (Radio Data System) and its information features for FM broadcasts.
Describes how to switch the display to show program service name, PTY, or frequency.
Explains the AF function for automatically searching for stronger signals of the same station.
Explains how the REG function limits selection to regional broadcast programs when AF is used.
Describes PI Seek for searching alternative stations when reception is weak.
Explains the TA function for automatic reception of traffic announcements.
Details PTY alarm for emergency announcements and how the unit responds.
Lists specific program types corresponding to PTY codes for radio stations.
Covers basic steps for inserting and playing a CD, including volume and track skipping.
Introduces functions like repeat play, random play, and scan play.
Explains how to repeat playback of a track or the entire disc.
Describes how to play tracks in a random order from the CD.
Explains how to scan the first 10 seconds of each track on a CD.
Details how to temporarily pause and resume CD playback.
Explains COMP and BMX functions for adjusting sound quality and reverberation.
Describes how to switch between fast forward/reverse and 10-track search methods.
Explains how to search through tracks in increments of 10 on a disc.
How to view disc title, artist, track title, and artist information from CD TEXT discs.
How to scroll text information that exceeds the display's character limit.
Covers basic steps for playing MP3, WMA, and WAV files, including folder selection.
Introduces advanced playback functions for media files.
Explains repeat play options for folders, tracks, and discs for media files.
How to play MP3/WMA/WAV tracks in a random order within selected repeat ranges.
Describes scanning the beginning of tracks in folders or across the disc.
Details how to pause and resume playback of media files.
How to switch between fast forward/reverse and 10-track search for media files.
Explains COMP and BMX functions for adjusting sound quality for media files.
How to search for tracks in increments of 10 within the current folder.
How to view text information like folder, file, track, artist, and album names.
How to scroll text information that exceeds the display's character limit for media files.
Introduces the various audio adjustment functions available on the unit.
Explains how to adjust front/rear and left/right speaker balance for optimal listening.
Describes how to adjust equalization to match car acoustics.
Lists and explains how to select from six preset equalizer curves.
Details how to adjust the currently selected equalizer curve settings.
Explains how to fine-tune center frequency and Q factor for equalizer bands.
Explains how loudness compensates for low and high sound range deficiencies at low volumes.
Details how to turn the subwoofer output on or off.
Explains how to adjust subwoofer cut-off frequency and output level.
Explains how to use the HPF to prevent low sounds from front/rear speakers.
Describes the F.I.E. function for enhancing front imaging by adjusting rear speaker output.
Explains how the bass boost function emphasizes low-frequency sounds.
Explains SLA to adjust volume levels of different sources to prevent radical changes.
Introduces customizing system settings for optimal performance.
How to set the FM tuning step to 50 kHz or 100 kHz.
Explains how to enable automatic station search during preset recall.
How to activate the auxiliary setting for connected equipment.
How to set rear output for full-range speakers or subwoofer connection.
Explains how to activate Power Save mode to reduce battery consumption.
How to connect and use auxiliary equipment via the stereo mini plug.
Procedure to select AUX as the audio source.
How to change the displayed title for the AUX source.
Explains automatic sound muting during calls or voice guidance.
Lists CD player error messages, their causes, and recommended actions.
Provides guidelines on using and caring for the CD player and discs.
Discusses playback compatibility and precautions for CD-R/CD-RW discs.
Explains MP3, WMA, and WAV file formats and general compatibility.
Provides details on MP3 file compatibility, ID3 tags, and supported frequencies.
Details WMA file compatibility, supported versions, and frequencies.
Explains WAV file compatibility, supported formats, and frequencies.
Illustrates the folder structure for MP3/WMA/WAV files on a CD-ROM.
Lists general specifications like power source, dimensions, and weight.
Details audio output power, load impedance, and equalizer specifications.
Provides specifications related to the subwoofer output.
Lists specifications for the CD player, including signal format and frequency response.
Provides specifications for the FM tuner, including frequency range and sensitivity.
Lists specifications for the MW tuner.
Provides specifications for the LW tuner.
To Next Page
