G
Gerald McbrideAug 15, 2025
What to do if the tray of my Pioneer DVD Player won't open?
- JjohnmoranAug 15, 2025
If the tray of your Pioneer DVD Player won't open, and an opening screen is displayed, check if the voltage of CP2302-pin 3 and pin 1 on the DVD MT Assy changes normally. Verify if a LOAD-DRV signal is reaching. Check the signals output from IC2301-pin 36 and pin 37 (CP2302-pin 4 and pin 5) on the DVDM Assy. Ensure the wires of CP2302 and CP2303 on the DVDM Assy aren't disconnected or damaged. Also, check if the voltage of CD2301-pin 5 changes when you press the Inside switch.