The Disc Setup menu
10
71
En
Initialize settings
You can initialize a DVD-RW disc for either VR mode
recording or Video mode recording. The first time you
load a new DVD-RW disc, it will be automatically
initialized for recording according to the DVD-RW Auto
Init. setting in the Initial Setup menu (see page 83).
The initialize menu here lets you reinitialize a disc, for
example if you want to change the recording format of
the disc. See
Initializing a DVD-RW disc
on page 55 for
detailed instructions.
Finalize settings
Finalize
Finalizing ‘fixes’ the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
See
Playing your recordings on other DVD players
on
page 54 for detailed instructions.
Undo Finalize
You can undo the finalization on DVD-RW discs recorded
on this recorder in Video mode. You need to do this if you
want to record more material or edit material already on
the disc.
You can also undo the finalization of VR mode discs
which have been finalized on other DVD recorders. If
when you load a disc the message
This disc cannot be
recorded. Undo the finalization
is displayed, use this
command to be able to record on the disc using this
recorder.
1 From the Disc Setup menu, select ‘Finalize’, then
‘Undo Finalize’ from the finalize options.
2 Select ‘Start’.
DVD-RW
DVD-R DVD-RW
DVD-RW
DVR-04_KU.book 71 ページ ２００４年３月１２日 金曜日 午前１１時４５分
To Next Page
Loading...
Need help?
General
