Need help?Do you have a question about the Pioneer GM-D1004 and is the answer not in the manual?
General| Amplifier class | F/D |
|---|---|
| Frequency range | 10 - 40000 Hz |
| Built-in crossover | Yes |
| Crossover frequency | 80 Hz |
| Audio output channels | 4.0 channels |
| Peak power per channel | 200 W |
| Signal-to-Noise Ratio (SNR) | 75 dB |
| Total Harmonic Distortion (THD) | 0.05 % |
| RMS power output per channel (2 Ohm) | 100 W |
| Purpose | - |
| Fuse rating | 15 A |
| Product color | Black |
| Connectivity technology | Wired |
| Speakers connectivity type | RCA |
Weight and Dimensions| Width | - mm |
|---|---|
| Weight | 550 g |
Important warnings and considerations before connecting or installing the amplifier.
Instructions for connecting the power cord and speaker wires to the amplifier unit.
Warnings and precautions to ensure safe and correct amplifier connection procedures.
Guide for connecting the amplifier using RCA output jacks from the car stereo.
Guide for connecting the amplifier using speaker output wires from the car stereo via the SP input cord.
Crucial warnings and precautions to ensure safe and proper installation of the amplifier.
Detailed technical specifications including power output, impedance, frequency response, and dimensions.
To Next Page