Need help?Do you have a question about the Pioneer GM-X402-02 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Frequency Response | 10 Hz - 50 kHz |
| Signal to Noise Ratio | 100 dB |
| Input Sensitivity | 200 mV to 6.5 V |
| Fuse Rating | 20A |
| RMS Power at 4 Ohms | 40 Watts x 2 |
| RMS Power at 2 Ohms | 50W x 2 |
| Bridged RMS Power at 4 Ohms | 100 Watts x 1 |
Safety warning for qualified technicians regarding complex product repairs.
Health and safety warning regarding lead in solder components.
Details the packing method for the product.
Illustrates the external view and layout of the amplifier.
Lists all parts with their corresponding numbers and descriptions.
Diagram detailing connections on the Mother Printed Circuit Board.
Diagram detailing connections on the Isolator Printed Circuit Board.
Instructions for disassembling the amplifier unit.
Indicator light that shows when the unit is powered on.
Switch to control Beat Frequency Control for AM interference.
Adjusts input sensitivity for optimal sound output.
Selects Low-Pass or High-Pass filter for speaker output.
Controls the level of bass boost effect.
Sets the frequency range for bass boost.
To Next Page