Need help?Do you have a question about the Pioneer M-90 and is the answer not in the manual?
Details power output, distortion, impedance, and frequency response.
Illustrates the overall signal path and functional blocks of the amplifier.
Describes how input signals are processed through the selection and buffer stages.
Details the power amplifier's circuitry, distortion, and performance.
Explains signal routing to speakers and headphones via relays.
Explains the protection mechanism against overload and DC output.
Details the power supply design for separation and interference prevention.
Details the pin distribution and block diagram for the LC7555 IC.
Outlines essential safety checks, especially leakage current.
Warns about using correct replacement parts and safety characteristics.
Details power output, distortion, impedance, and frequency response.
Illustrates the overall signal path and functional blocks of the amplifier.
Describes how input signals are processed through the selection and buffer stages.
Details the power amplifier's circuitry, distortion, and performance.
Explains signal routing to speakers and headphones via relays.
Explains the protection mechanism against overload and DC output.
Details the power supply design for separation and interference prevention.
Details the pin distribution and block diagram for the LC7555 IC.
Outlines essential safety checks, especially leakage current.
Warns about using correct replacement parts and safety characteristics.
General| Type | Stereo Power Amplifier |
|---|---|
| Total Harmonic Distortion | 0.003% |
| Damping Factor | 100 |
| Signal to Noise Ratio | 120dB |
| Power Output | 200 watts per channel into 8Ω (stereo) |
| Weight | 22.5kg |
To Next Page
