Pioneer PD-TM3 - PROGRAMMING PLAYBACK; Program Track;Disc Selection; Direct Program Recording

TO PLAY ONLY DESIRED TRACKS/DISCS
|
|
Program playback -To program tracks/dises in
desired order :
Only in the stop mode, Disc programming is possible.
Also, the dialog appears in step to facilitate programming.
Track programming is possible in the stop or playback mode. However, |
¢ <<¢ OF Be BPI Cannot be used to select tracks during playback
mode. Select stop rnode or playback mode before programming.
1 Press PROGRAM.
® The PROGRAM indicator lights, and “MAG ?" (Manazine) £
appears on the display for about 10 seconds
2 Press MAGAZINE which contains the disc to be :
programmed. 5
e@ When MAGAZINE is pressed, "DISC ?" appears on the display 1
for about 10 seconds.
3 Press the DISC number button which contains the |
track to be programmed. |
|
To program entire discs, enter the desired disc numbers with
the DISC number buttons and go to step 5.
® When the DISC number button is pressed, "AL" (all tracks)
appears on the display. Then, "TRACK ?° is displayed for
about 10 seconds.
| 2 Crncazne 1) a MAGAZINE 4 Enter the track No. to be programmed with the Digit
|
3
=
M1
M2
Mg
buttons.
|
|
|
|
Only
in
the
stop
mode,
you
can
use
Ht
<<
of
D>
Bp.
After
i
i
]
selecting the track No., be sure to press PROGRAM.
About 2 seconds have passed since <¢-4 ~€-4 or > BBeJis pressed,
the track No. to be programmed is autornatically entered.
Repeat steps 2 through 4 to program other tracks.
Press >.
The tracks are played in the programmed order. When all
programmed tracks have been played, the player enters stop
mode
To stop Program playback, press @.
5
6
® Programs containing up to 48 steps can be created.
@ When 48 steps are programmed, “MAG?", "DISC?”, or
oS DISC] DISC2 DISCS “TRACK?” dogs not appear on the display.
] eee C_] CL] e@ To = cor previous or next step in a program, press kt <td
or s i
Wy DISC 4 DISCS DISCE 2 Toentertrack No. 11 or above with the Digit buttons, see “Track
C ia aa Pat . Search” on page 13.
@ ach time a selection is programmed, the display will show the
programmed number.
1.1
TRACK?
@
If
the
magazine
is
in
the
player,
the
program
contents
will
not
F
be
erased
even
if
the
power
is
turned
off.
i
pecs (a Direct program
<a <2) During normal playback or Magazine Hi-Lite Scan playback, the tack
oo cS being played can be programmed.
1, Press PROGRAM to enter the program mode.
2. To search for a desired track during normal playback, it is possible
to skip to succeeding tracks by pressing ed <4 of BR BE, Also,
Magazine Hi-Lite Scan function can be used to move from track to i
track through the disc. |
3. lfyouwish to program the track currently playing, press PROGRAM
while the track is playing. a
® Direct programming is not possible during prograrn playback.
16
<PRB1188>
=n