Pioneer PD-TM3 - SUPPLIED ACCESSORIES; Accessory Identification; REMOTE CONTROL BATTERY INSTALLATION; Battery Insertion Guidelines

PUT BATTERIES INTO THE REMOTE
| CONTROL UNIT
i)
@
5)
® sae
Ke
®
®
®
®
6-Compact Disc Magazine x 3
(Called magazine in the explanatory text.)
The supplied 6-Compact Disc Magazine is only for 12 cm {5-
inch) discs.
Single-Compact Disc Magazine x 1 (for multivoltage and
Australian models}
(Called single-disc magazine in the explanatory text.)
The supplied Single-Compact Disc Magazine is applied to an
8 cm disc or 12 cm disc.
Output cable x 1
Control cable x 1 {Canadian model only}
Remote control unit x 7
AAA/RO3 dry cell batteries x 2
SK
Open
the
lid
of
the
battery
compartment
on
the
rear
of
the
remote
contro!
unit,
and
insert
the
batteries,
taking
care
to
align
the
(+)
and
{—)
polarities
correctly.
NOTES:
e in order to prevent battery leakage, remove the batteries when
not using the remote control unit for an extended period fone
month or more}. If leakage occurs, carefully wipe away any
battery fluid inside the compartment, and replace the batteries
with new ones.
@ Do not allow books or other objects to rest on top of the re-
mote
control
unit,
since
the
buttons
may
be
depressed,
causing
faster exhaustion of the batteries
Incorrect use of batteries may cause leakage or rupture.
Always be sure to follow these guidelines:
A. Always insert batteries into the battery compartment
correctly matching the positive iS) and negative ©
polarities, as shown by the display inside the
compartment.
B. Never mix new and used batteries.
C. Batteries of the same size may have different voltages,
depending on brand. Do not mix different brands of
batteries.
5
<PRB1188>
En