255
7 Table of commands not compatible with PDP-434CMX to PDP-425CMX
AJN Ends 232C integrator adjustment mode.
AJY Starts 232C integrator adjustment mode.
COF Displays present color off setting.
COFS00 Does not set color off.
COFS01 Sets color off.
DPR Resets still picture movement function.
FXO Selects audio output fix.
FRCS02 Sets FRC to MODE2.
FRCS03 Sets FRC to MODE3.
GRAS04 Sets gradation to “DRE MID”.
GRAS05 Sets gradation to “DRE HIGH”.
GRAS06 Sets gradation to “DRE LOW”.
GRAS07 Sets gradation to “HIGH CONTRAST”.
LNN Prohibits loudness.
LNY Permits loudness
MCN Turns off MASK CONTROL.
MCY Turns on MASK CONTROL.
MGFS01 Turns on VIDEO WALL.
MSCS01 Turns on MULTI SCREEN.
SIM Displays present setting of SIDE MASK.
SIMS01 Sets setting of SIDE MASK to normal.
SIMS02 Sets setting of SIDE MASK to overlay 1.
SIMS03 Sets setting of SIDE MASK to overlay 2.
SZMS04 Sets screen size to CINEMA.
SZMS08 Sets screen size to FULL 1035i.
MIR Displays present MIRROR MODE setting
PLN Turns off center brightness correction.
PLY Turns on center brightness correction.
PUCS02 Sets PURE CINEMA to advance.
VRO Selects audio output variable.
RS-232C Adjustment
7 Table of commands not compatible with PDP-505CMX
EDIS01 Sets DVI SELECT to PC.
EDIS02 Sets DVI SELECT to VIDEOS1.
To Next Page
Loading...
Need help?
General