Pioneer PL-630 Operating Instructions

Quartz PLL DIRECT DRIVE
FULL
AUTOMATIC
TURNTABLE
L-630
.
S/G
OPERATING
INSTRUCTIONS
HGT
Sane
eaaeeee
|
|
—
Thank you for buying this Pioneer stereo turntable.
Please read through these operating instructions and
then you will know how to operate your model
tions, put them away in a safe place for furture
reference.
HGT, and they can be used for the HGT, ST and S/G
models. The differences between the models are given
Power Requirements
properly. After you have finished reading the instruc-
These operating instructions are based on the model |__|
below.
=>
4
PL-630/HGT:
220-240V
©
,
SOHz
-
] PL-630/ST,
S/G:
AC 110-120/220-240V
~ (switch-
able),
50, 60Hz
Nore
Read through the section on the “LINE VOLTAGE SELEC.
TOR SWITCH™ before using your turntable and chech that
4 |_| —| the volagy ‘solictor nultcn Wioat corvectty Yor Gat favour
oa
Power Cord
| | PL-630/HGT:
| This is configured as an AC inlet type. Use a
separate power cord in order to connect the power
|
supply.
PL-630/ST, $/G:
:
+
The
power
cord
is
mounted
at
the
rear.
|
Accessories
A cartridge is not provided with these models.
However, screws for mounting the cartridge, as well
PL-630/HGT, ST: —
| 7 as washers and nuts come with each model, and so
before use, provide yourself with the cartridge you
intend to use, read through the section “AT-
TACHING THE CARTRIDGE” and then attach
the cartridge to the accessory headshell.
This model comes with the PC-600 cartridge (which
is attached to the accessory headshell). Screws for
mounting a cartridge as well as washers and nuts are
PL-630 S/G:
not provided.

Pioneer PL-630 Specifications

General

Drive System	Direct Drive
Motor	Quartz PLL Hall Motor
Platter	Aluminum Die-cast
Wow and Flutter	0.025% WRMS
Signal to Noise Ratio	78 dB
Effective Length	237 mm
Overhang	15 mm
Power Requirements	AC 120V, 60Hz
Weight	12.5 kg
Speeds	33 and 45rpm
Tonearm Type	Static-balanced type
Cartridge Weight Range	4-10 g
Tracking Force Range	0-3 g