Need help?Do you have a question about the Pioneer s-htd320 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Type | Receiver |
| Inputs | HDMI, USB, Optical, Coaxial, Analog |
| Outputs | HDMI, Subwoofer, Speaker terminals |
| Surround Sound Formats | Dolby Digital, DTS |
| Input Sensitivity/Impedance | 200 mV/47 kΩ |
| Signal-to-Noise Ratio | 98 dB |
| Speaker Impedance | 6 ohms |
Superlative audio performance with Dolby Digital* and DTS** software.
Easy setup using on-screen prompts for video and language settings.
Confirms included accessories: remote, batteries, antennas, cords, manual, warranty.
Explains manual structure: system basics, controls, setup, features, and troubleshooting.
Instructions for opening the compartment and inserting batteries correctly.
Guidelines for optimal remote operation, range, and interference avoidance.
Lists playable disc formats (DVD, CD, Video CD) and incompatible ones.
Instructions for connecting front, rear, center, and subwoofer speakers using color-coded cables.
Guidelines for optimal speaker placement relative to the listening position.
Connecting the system to a TV via video and optional audio cables.
Instructions for connecting AM loop and FM wire antennas for radio reception.
Guidance on connecting external AM and FM antennas for improved reception.
Connecting external audio/digital components like tape decks, VCRs, or MD players.
Instructions for plugging the unit into a household power outlet.
Identification of buttons and indicators on the front of the unit.
Detailed list and function of all buttons on the remote control.
Explanation of indicators and information shown on the unit's front display.
Steps to power on the system and set the built-in clock for timer features.
Adjusting distances from listening position to front, center, and surround speakers.
Adjusting relative speaker levels for balanced surround sound using a test tone.
Step-by-step guide to using the on-screen Setup Navigator for initial system configuration.
Basic controls for playing discs, with further functions in Chapter 7.
Table detailing the function of each playback button (Play/Pause, Stop, Scan, Skip).
How to navigate DVD menus using the remote control's navigation buttons.
Instructions for changing discs using the EXCHANGE button, even during playback.
Steps to tune into FM and AM radio using automatic and manual tuning.
How to store up to 30 radio station frequencies for easy recall.
Connecting and selecting external audio sources like TV or VCR via TV/AUX.
Simple method to shape sound by adjusting bass and treble levels.
Explanation of various sound modes to add surround effects to audio sources.
Selecting sound settings for Dolby Digital or DTS sources (Auto, Standard, Advanced Theater).
How to adjust the effect level for Advanced Theater modes (10-90).
Feature for direct recording to external recorder, bypassing sound settings.
Using search modes (Title, Chapter, Time) to locate specific points on a disc.
How to display, change, or turn off subtitles during DVD playback.
How to display or change the audio language for multi-language DVD discs.
Creating a custom playback sequence of up to 24 tracks/chapters from loaded discs.
How to play titles, chapters, or tracks in a random order.
Setting the player to repeat tracks, discs, or sections (looping).
How to play only CDs, automatically skipping DVDs/Video CDs.
How to bookmark a position on a DVD/Video CD to resume playback later.
How to use Condition Memory to save and recall disc-specific settings.
How to display track, chapter, title, and data transmission rate information.
Setting the wake-up timer to turn the system on with sound from a disc or radio.
Instructions for turning the wake-up timer ON or OFF.
Setting the sleep timer to automatically switch the system to standby after a set time.
Adjusting LFE channel signal level to prevent subwoofer distortion.
Switching on DRC to even out soundtrack volume, especially for quiet dialog.
Applies to Dolby Digital discs with dual-mono material for separate channel playback.
Adjusting relative speaker volumes for a balanced sound in any mode.
Overview of accessing and navigating the DVD system settings menu.
Settings for TV screen aspect ratio, picture quality, and S-Video output.
Setting the S-Video output signal type (S1 or S2).
Choosing between Field and Frame modes for displaying still images.
Adjusting the position or turning off on-screen operation displays.
Setting to show or hide the camera icon for multi-angle scenes.
Setting OSD, Audio, and Subtitle languages, including Auto Language.
Setting subtitle display options (On, Off, Assist Subtitle).
Options for disabling subtitles, including 'With Audio' or 'Selected Subtitle'.
Setting the Setup Menu Mode between Basic and Expert.
Setting parental control levels (1-8) and default password.
Setting the screen saver to prevent burn-in on CRT TVs.
Changing the AM tuning interval between 9kHz and 10kHz.
Handling and cleaning instructions for discs to ensure proper playback.
Warning against using damaged or shaped discs to prevent system damage.
Definitions of terms like Aspect Ratio, Chapter, and Dolby Digital.
Table showing effects of TV screen settings on various disc formats.
Common problems and their solutions, including disc issues, playback, and display.
Instructions for resetting all system settings to factory defaults.
Technical specifications for amplifier, DVD player, tuner, and speaker system.
To Next Page
