To Next PageTo Next Page
Need help?Do you have a question about the Pioneer SA-5500II and is the answer not in the manual?
General| Total Harmonic Distortion | 0.1% |
|---|---|
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Channel Separation | 50dB (MM), 55dB (line) |
| Output | 150mV (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Type | Integrated Amplifier |
| Signal to Noise Ratio | 90dB (line) |
Details protection circuits for speakers and power IC, including current limiter, thermal shutdown, and muting.
Guides on connecting two sets of stereo speaker systems, including polarity and impedance notes.
Explains the function of the power switch and the delay before sound output due to the muting circuit.
Details the Bass, Treble, Balance, and Volume controls for adjusting sound characteristics.
Describes the Function switch for source selection and the Loudness switch for low-volume enhancement.
Provides instructions on handling records, stylus, and setting volume before playing.
Step-by-step guide for playing records using the PHONO function and adjusting controls.
Step-by-step guide for changing the voltage setting on S models (110-240V).
Instructions for adjusting the voltage setting on HG models (220-240V).
Alerts users to the presence of uninsulated dangerous voltage and the risk of electric shock.
Stresses the need for qualified personnel for servicing and not removing covers.
Covers reading instructions, warnings, following procedures, and handling water/moisture.
Details power cord routing, polarization, and grounding requirements for safety.
Warns about laser diode safety and the need for qualified service personnel.
Advises on controls and optical instruments to avoid hazardous radiation exposure.
Stresses safe handling of the power cord to prevent electric shock or fire hazards.
Advises on installing the player in a well-ventilated location, away from heat, moisture, and dust.
Provides guidance on storing discs properly to prevent warping and damage.
Explains how to clean discs gently and what cleaning agents to avoid.
Guides on connecting the output cable to the amplifier's input, noting polarity and avoiding PHONO terminals.
Explains connecting the optical cable for digital output, specifying compatible equipment.
Lists and describes the functions of buttons and indicators on the front panel of the CD players.
Lists the functions of buttons on the remote control units for PD-6700 and PD-5700 models.
Step-by-step guide to inserting a disc and starting playback.
