13
02
Controls and displays
10 MULTI-ZONE select buttons
Switch to perform operations in ZONE 2, ZONE 3 and HDZONE (page 79).
11 Remote control LED
Lights when a command is sent from the remote control.
12
Switches the remote to control the receiver (used to select the white commands).
Switch to perform operations in the main zone.
Also use this button to set up surround sound.
13 VOLUME +/–
Use to set the listening volume.
14 MUTE
Mutes the sound or restores the sound if it has been muted (adjusting the volume also restores the sound).
15 LIGHT
Press to turn on/off the illumination for the buttons.
The way the buttons light can be selected from four modes (page 86).
To Next Page
Loading...
