(1) Remove the four cushion circles 14B.
(2) Remove the two hex head screws. (ABA7078)
(3) Remove the six screws. (BMZ30P040FTB)
(4) Remove the 31 screws. (BPZ30P080FTB)
(for SC-LX82)
Remove the 30 screws. (BPZ30P080FTB)
(for SC-LX72)
(5) Remove the one screw. (BBZ30P060FCC)
(6) Remove the 22 screws. (ABA1011)
(7) Remove the rear panel.
[1-2] Rear panel
SC-LX82 only
2
×2
6
6
×5
6
×16
4
×31
3
×6
5
1 1 1 1
7
7
[2] PCB Assys
(1) Remove the one push rivet.
(2) Disconnect the one flexible cable.
(3) Disconnect the two connectors.
(4) Disconnect the three B to B connectors.
(5) Remove the COMPONENT Assy.
[2-1] COMPONENT Assy
1
COMPONENT Assy
CN8601
CN7704
CN6010
CN6004
CN6009
CN7602
V-BRIDGE Assy
Rear panel
4
2
4
3
3
4
To Next Page
Loading...
