41
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting | Appendix
■ Precision Distance
With the distance of the Front Left speaker from the listening position as the standard,
adjust the position of each speaker with a precision up to the closest 1 cm. Adjust the
distance in order starting at the Front Right speaker. Test tone output alternates between
the selected speaker and the speaker that is used as its benchmark. First setup the
speaker setup microphone in the listening position and connect it to the MCACC SETUP
MIC jack on the main unit, then select this setting.
Setting Item Default Value Setting Details
Front Right - Move the speakers back and forth about a
centimeter at a time in relation to the speaker
setup microphone so that "Score" becomes "10.0"
If the number does not become "10.0", put the
speaker in the position where the maximum value
is achieved.
•
Do not move the Front Left speaker, upon which
calibration is based, during the adjustments.
Center - Move the speakers back and forth about a
centimeter at a time in relation to the speaker
setup microphone so that "Score" becomes "10.0"
If the number does not become "10.0", put the
speaker in the position where the maximum value
is achieved.
•
Do not move the Front Left speaker, upon which
calibration is based, during the adjustments.
Height 1 Left - Move the speakers back and forth about a
centimeter at a time in relation to the speaker
setup microphone so that "Score" becomes "10.0"
If the number does not become "10.0", put the
speaker in the position where the maximum value
is achieved.
•
Do not move the Front Left speaker, upon which
calibration is based, during the adjustments.
Setting Item Default Value Setting Details
Height 1 Right - Move the speakers back and forth about a
centimeter at a time in relation to the speaker
setup microphone so that "Score" becomes "10.0"
If the number does not become "10.0", put the
speaker in the position where the maximum value
is achieved.
•
Do not move the Height 1 Left speaker, upon
which calibration is based, during the adjustments.
Height 2 Left - Move the speakers back and forth about a
centimeter at a time in relation to the speaker
setup microphone so that "Score" becomes "10.0"
If the number does not become "10.0", put the
speaker in the position where the maximum value
is achieved.
•
Do not move the Front
Left
speaker, upon which
calibration is based, during the adjustments.
Height 2 Right - Move the speakers back and forth about a
centimeter at a time in relation to the speaker
setup microphone so that "Score" becomes "10.0"
If the number does not become "10.0", put the
speaker in the position where the maximum value
is achieved.
•
Do not move the Front Right speaker,
upon which calibration is based, during the
adjustments.
Surround Left - Move the speakers back and forth about a
centimeter at a time in relation to the speaker
setup microphone so that "Score" becomes "10.0"
If the number does not become "10.0", put the
speaker in the position where the maximum value
is achieved.
•
Do not move the Front Left speaker, upon which
calibration is based, during the adjustments.
To Next Page
Loading...
