- 106 -
2 Touch the desired mode.
• Different settings can be stored for each video source.
• When a video is viewed in wide screen mode that does not match its original aspect ratio, it may
appear different.
• The video image will appear coarser when viewed in [Zoom] mode.
• Image files can be set to either [Normal] or [Trimming] in wide screen mode.
• Depending on the software version of this unit, this function may vary.
You can restore settings or recorded content to the default settings from [Restore
Settings] in (page 89).
[Full] Displays images across the entire screen.
Some images may not be displayed across the entire screen.
[Zoom] Displays the images enlarging them vertically.
[Normal] Displays images without changing the ratio.
[Trimming] An image is displayed across the entire screen with the horizontal-to-vertical ratio
left as is. If the screen ratio differs from the image, the image may be displayed
partly cut off either at the top/bottom or sides.
[Trimming] is for image files only.
Restoring this product to the default settings
To Next Page
Loading...
Need help?
General
