Why is the Error LED always on and beeper alarms on my Pioneer STEP-5e Printer?
If the Error LED is constantly lit and the beeper is alarming on your Pioneer Printer, it means that the printer cover is open. Make sure to close the printer cover.
Warnings about the hot print head and static damage to the printer head.
Guidelines for safe installation, operation, and maintenance of the printer.
Details standard and optional accessories and how to check for missing items.
Instructions for unpacking, checking for damage, and selecting an installation site.
Details the status and meaning of the POWER, ERROR, PAPER, and STATUS LEDs.
Configuration options for DIP Switch 1 and 2 for serial interface.
Configuration options for DIP Switch 1 and 2 for parallel, USB, Bluetooth, and Ethernet interfaces.
Solutions for common problems like the printer not powering on or LEDs not lighting.
Explains meanings of LED indicators and beeper alarms and their solutions.
Addresses issues like colored stripes, blurred printing, and paper jams during printing.
Solutions for cutter jams, insufficient cutting, and paper jams during cutting.
Step-by-step guide on how to safely remove jammed paper from the printer.
Guidelines on distance, interference, and multiple devices for Bluetooth pairing.
General| Print Technology | Thermal Transfer |
|---|---|
| Resolution | 203 dpi |
| Print Speed | 50.8 mm/sec |
| Maximum Print Width | 104 mm |
| Connectivity | RS-232C |
| Paper Handling | Roll paper |
To Next Page
