Pioneer SX-3400 User Manual

Details on power output, THD, IM distortion, damping factor, input/output levels, and frequency response.

Details on sensitivity, selectivity, signal-to-noise ratio, image response, IF response, and antenna.

Details on usable sensitivity and quieting sensitivity for mono and stereo reception.

Information on power requirements, consumption, dimensions, and weight.

Identifies and describes all front panel controls, indicators, and jacks.

Step-by-step instructions for disassembling the unit's main components.

Diagrams illustrating the placement of external and internal components.

Illustrates the main functional blocks of the receiver.

Detailed explanations of the AM/FM tuner, equalizer, and power amplifier circuits.

Step-by-step guide for properly stringing the dial cord.

Procedure to adjust the idle current for the amplifier section.

Steps for tuning and calibrating the AM tuner.

Steps for tuning and calibrating the FM tuner.

Procedures for adjusting the multiplex decoder for stereo reception.

Diagram showing exploded view of exterior parts with a parts list.

Diagram showing exploded view of interior parts.

Detailed electrical schematic of the entire unit.

Diagram illustrating component layout on the printed circuit board.

Comprehensive list of all components used in the unit.

Instructions for packing the unit for shipping.

Specifications specific to the S type model.

Comparison of miscellaneous parts between KU and S types.

Electrical schematic for the SX-3400/S model.

Component layout on the PCB for the SX-3400/S model.

Component list for the SX-3400/S model.