Need help?Do you have a question about the Pioneer TX-5300 and is the answer not in the manual?
General| Tuning Bands | FM, MW |
|---|---|
| Tuning Scale | Analogue |
| FM Tuning Range | 88 to 108 MHz |
| Output Voltage (FM) | 650 mV |
| MW/AM Tuning Range | 530 - 1605 kHz |
| Sensitivity (FM) | 2.0 µV (IHF) |
| Signal to Noise Ratio (MW/AM) | 50 dB |
| Distortion (FM) | 0.3% |
| Distortion (AM) | 0.8% |
| Selectivity (FM) | 60 dB |
| Selectivity (MW) | 30 dB |
| Frequency Response (FM) | 20Hz to 15kHz (FM) |
| Dimensions | 420 x 144 x 311 mm |
| Type | Stereo Tuner |
Details about FET, ICs, Transistors, and Diodes used in the tuner.
Technical parameters for FM reception including sensitivity, selectivity, and separation.
Technical parameters for AM reception including sensitivity and selectivity.
Power requirements, consumption, dimensions, and weight of the unit.
List of accessories included with the tuner, such as antennas and cords.
Explanation of the Function switch modes: AM, FM AUTO, FM MONO.
Description of the meter used for tuning AM and FM stations.
Function of the indicator light for FM stereo reception.
Procedures for adjusting the FM tuner section, including coil and capacitor tuning.
Steps for adjusting the FM MPX section using a PLL demodulator circuit.
Procedures for tuning and adjusting the AM oscillator coil and RF choke coils.
Detailed circuit schematic for the tuner and power supply sections.
List of electronic components for the tuner assembly.
Component breakdown and schematic for the tuner circuit.
Schematic and parts list for the power supply circuit assembly.
To Next Page
