VSA-AX10, VSX-AX10
12
SP (B) ASSY
AD
AB
AB
AJ
(ANP7388-A)
CN1102
CN1101
AC IN
AC OUTLET
POWER TRANSFORMER
CN1206
Line Voltage can be changed by the following modification:
1. Disconnect the AC power cord.
2. Remove the cover.
3. Change the connection wire from SP (B)ASSY
(W122,W123 and W137,W138) to POWER TRANSFORMER
as follows.
Voltage Jumper No. of SP(B) ASSY
230V W122,W123 Elimination
240V W137,W138 Addition
4. Stick a line voltage label on the rear panel.
Description Part No.
220V label AAX-193
240V label AAX-192
Line Voltage Selection
A J
To Next Page
Loading...
Need help?
General