To Next PageTo Next Page
Need help?Do you have a question about the Pioneer VSX-1015TX and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| Total Harmonic Distortion (THD) | 0.09% |
| Input Sensitivity | 200 mV |
| Speaker Load Impedance | 6-16 ohms |
| HDMI | No |
| Frequency Response | 5 Hz - 100 kHz |
| Digital Inputs | 2 x Optical, 2 x Coaxial |
| Video Inputs | 4 x Composite, 2 x S-Video |
| Video Outputs | 2 composite, 1 S-video |
Highlights the key design aspects and technologies of the receiver, including MOSFET design and THX Select2 certification.
Guides users through the initial setup for surround sound playback using the receiver.
Explains the process of using the MCACC system for automatic room calibration and speaker setup.
Provides basic steps for turning on components and playing audio/video sources.
Illustrates how to connect digital audio sources like tuners and players to the receiver.
Guides on connecting analog audio sources like CD players and decks to the receiver.
Details connecting sources with multichannel analog outputs for surround sound.
Shows how to connect video sources like TV tuners and DVD players to the receiver.
Provides a detailed guide on connecting speakers to the receiver's terminals.
Identifies and explains the controls and indicators located on the receiver's front panel.
Details how to use THX listening modes for enhanced cinema sound quality.
Explains various advanced surround sound modes for different audio sources.
Details how to use surround back channels for 6.1/7.1 playback, including Extended mode.
Explains how to create virtual surround back channels without physical speakers.
Guides on making detailed manual adjustments to MCACC settings after automatic setup.
Details how to adjust the overall balance of speaker system levels using test tones.
Explains how to set precise delay settings for speaker distance for accurate sound arrival.
Describes the function of Acoustic Calibration EQ for room equalization and sound tuning.
Guides on manually adjusting the frequency balance for desired EQ settings.
Allows detailed settings for optimizing surround sound performance beyond Auto MCACC.
Specifies speaker configuration, including size, number, and subwoofer connection.
Explains how to program the remote control to operate other audio/video components.
Guides on setting up a second zone for stereo playback using surround back terminals.
Details the process and benefits of bi-amping front speakers for improved sound.
Explains the process and benefits of bi-wiring speakers for better sound quality.
Guides on connecting external amplifiers to channels using the receiver's pre-out terminals.
Describes SR+ features for enhanced interaction with Pioneer plasma displays, like auto input switching.
Allows assigning specific inputs to digital and component video terminals.
Lists common problems and their solutions for the receiver and connected components.
Provides specific troubleshooting steps for various 'no sound' issues across different speaker setups.
Addresses issues related to radio reception and audio signal problems.
Provides troubleshooting tips for remote control operation and SR cable connectivity.
Provides detailed technical specifications for the receiver's amplifier, tuner, and other sections.
