Need help?Do you have a question about the Pioneer VSX-1018AH-S and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| Power Output | 130 Watt |
| HDMI Inputs | 3 |
| HDMI Output | 1 |
| Zone 2 Output | Yes |
| Weight | 29.1 lbs |
| Frequency Response | 5 - 100000 Hz |
| Signal-To-Noise Ratio | 92 dB |
| Input Sensitivity | 200 mV |
| HDMI Switching | Yes |
| Audio D/A Converter | 192 kHz/24-bit |
| THX certified | No |
| HDMI Pass-Through | Yes |
| Output Impedance / Channel | 8 ohms |
| Audio Formats Supported | Dolby Digital |
| Video Formats Supported | 1080p |
| Input Impedance | 47 kOhm |
| DSP Modes | Virtual Surround |
| Input Sensitivity/Impedance | 200 mV/47 kΩ |
| Dimensions | 435 x 162 x 410 mm |
| Amplification Type | Discrete |
Basic steps for connecting and setting up surround sound.
Guide to using the automatic acoustic calibration system for optimal sound.
Instructions for connecting HDMI-compatible devices for audio/video.
Guide to enjoying surround sound from various sources and speaker setups.
Detailed guide for advanced automatic acoustic calibration.
Step-by-step instructions for manually fine-tuning speaker settings.
Configuring HDMI Control function and related settings.
Common issues and their solutions for power, sound, video, and remote control.
To Next Page
