To Next PageTo Next Page
Need help?Do you have a question about the Pioneer VSX-830-K and is the answer not in the manual?
General| Receiver type | stereo |
|---|---|
| Output impedance | 6 Ω |
| Audio output channels | 5.2 channels |
| Signal-to-Noise Ratio (SNR) | 98 dB |
| Power output per channel (20-20KHz@8 Ohm) | 140 W |
| HDMI in | 6 |
| AC (power) in | Yes |
| Composite video in | 2 |
| Digital audio optical in | 1 |
| Connectivity technology | Wired |
| Speakers connectivity type | - |
| Audio formats supported | AAC, AIFF, FLAC, MP3, WAV, WMA |
| Supported radio bands | AM, FM |
| Preset stations quantity | 63 |
| Optical drive included | No |
| Supported video modes | 2160p |
| Display | LCD |
| Product color | Black |
| Audio decoders | Dolby Digital Plus, Dolby Pro Logic II, Dolby TrueHD, DTS Neo:6, DTS-HD Master Audio |
| Apple docking compatibility | Not supported |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.1 W |
Weight and Dimensions| Depth | 331.5 mm |
|---|---|
| Width | 435 mm |
| Height | 168 mm |
| Weight | 8700 g |
General safety advice for service technicians, including precautions and warnings.
Procedure to measure leakage current to ensure safety before returning unit to customer.
Details on safety-related parts and hazards of using non-specified replacement components.
Essential checks to perform after servicing to ensure proper product quality and customer satisfaction.
A comprehensive diagram illustrating the internal wiring and connections between major assemblies.
Flowchart for diagnosing and resolving 'No Power' issues, checking voltages and component status.
Flowchart for diagnosing and resolving 'No FL Display' issues, checking voltages and components.
Flowchart for diagnosing and resolving 'No Sound' issues, checking relays, outputs, and signal paths.
Further troubleshooting steps for 'No Sound', including checking voltages, signals, and speaker settings.
Diagnosing issues related to Tuner, USB, Digital Audio, HDMI, and Network inputs.
Flowchart for diagnosing and resolving 'No Picture' issues, checking composite and HDMI outputs, and OSD.
List of error items detected in the amplifier system, with FL display, LED status, detection method, and remarks.
Details on protection circuit processes, including MHL overcurrent detection and warning indications.
Description of overload detection and DC protection circuits, including reference information for voltage values.
Details on thermal detection circuits for amplifier overheat protection, including temperature sensing points.
How to enter and use the test mode to view detected protection history and reset error counts.
Procedure to reset all receiver settings to factory defaults using front panel controls.
Steps for safely discharging capacitors on the MAIN Assy (C55, C58) and C101 before servicing.
Details on required adjustments after replacing specific assemblies like AMP5, DMAIN, or Network module.
Step-by-step guide for entering Update Panel Mode and performing firmware version updates.
