How to fix intermittent sound when playing DTS software on Pioneer VSX-909RDS Receiver?
If the sound is output intermittently when software with DTS is played back on your Pioneer Receiver, use the STANDARD mode to get the best results.
What to do if my Pioneer VSX-909RDS is not playing in EX mode when using THX AUTO mode?
If your Pioneer Receiver is not playing in EX mode when using THX AUTO mode, it's likely because you are not using a source with a Surround EX flag. If you want to hear 7 channel sound, use a Surround EX source.
What to do if I can't get DIGITAL to come up when using the SIGNAL SELECT button on my Pioneer VSX-909RDS Receiver?
If you can't get DIGITAL to appear when using the SIGNAL SELECT button on your Pioneer Receiver, verify that the digital connections and the DIGITAL IN SELECT choices are correct. Also, ensure that the TAPE2 MONITOR mode is OFF.
Why broadcast stations cannot be selected automatically on my Pioneer VSX-909RDS?
Broadcast stations cannot be selected automatically on your Pioneer Receiver due to weak radio signals. Connect an outdoor antenna.
General| Type | AV Receiver |
|---|---|
| Channels | 5.1 |
| Impedance | 8 Ohms |
| THD | 0.08% |
| Input Sensitivity | 200 mV |
| Speaker Load Impedance | 6 - 16 Ohms |
| Video Connections | Composite, S-Video |
| Digital Inputs | 2 Optical, 1 Coaxial |
| Tuner Type | FM/AM |
| Power Output per Channel | 100 Watts (8 ohms, 1 kHz, 0.09% THD) |
| Video Inputs/Outputs | 3 x Composite In, 1 x Composite Out |
Guide for connecting DVD player and TV for surround sound.
Instructions for connecting speakers and subwoofer to the receiver.
Steps to set up the remote control and turn on the receiver.
Procedure to assign digital inputs for connected digital components.
Steps to play a DVD and achieve surround sound.
Tips for optimizing surround sound settings and speaker setup.
Details on the receiver's multi-channel stereophonic design.
Information on the receiver's compatibility with audio formats.
Explains support for THX, Dolby Digital, DTS, and MPEG formats.
Features for enhancing movie soundtracks and music.
Explanation of the RDS system for FM radio reception.
Details on the receiver's low standby power consumption.
List of accessories to check for upon purchase.
Guidance on navigating and understanding the manual's structure.
Instructions for loading batteries into the remote control.
Information on the effective range and conditions for remote operation.
How to control other Pioneer components using the receiver's remote.
Guidance on proper installation and ventilation for the receiver.
Instructions on how to open the receiver's front panel.
Instructions for connecting analog audio sources like turntables and recorders.
Advice on positioning a cassette deck to avoid noise interference.
Guide for making coaxial and optical digital audio connections.
Specific connection diagram for DVD/LD players.
Procedure to match digital inputs with connected components.
Instructions for connecting various video sources like DVD/LD players and VCRs.
Guide for connecting satellite TV tuners to the receiver.
Instructions for connecting the TV or monitor to the receiver.
How to connect an external multi-channel decoder.
Guide for connecting AM and FM antennas for better reception.
Instructions for connecting various speaker configurations.
How to adjust speaker impedance settings on the receiver.
Tips and diagrams for optimal speaker placement for surround sound.
Guide for connecting external amplifiers to the receiver.
Information on using the receiver's AC outlets for powering components.
Explanation of the receiver's front panel display indicators and symbols.
Detailed explanation of the functions of each button on the remote control.
Overview of the receiver's front panel controls and their functions.
Rules for ensuring the on-screen display is visible on the TV.
Procedure to set the video system (PAL/NTSC) for the OSD.
Comprehensive guide to setting up surround sound parameters.
Assigning digital inputs for connected digital components.
Specifying connected speaker types, sizes, and configurations.
Setting speaker delay times based on listening position distance.
Balancing the sound output levels of individual speakers.
Adjusting the frequency for dividing bass signals to subwoofer/speakers.
Setting maximum output level for the LFE channel.
Compressing dynamic range for better low-volume surround sound.
Configuring sound level settings for multi-channel external decoders.
Overview of available sound modes like STANDARD, THX, DSP.
Details on STANDARD, STANDARD 7.1, and STANDARD AUTO modes.
Explanation of THX CINEMA, SURROUND EX, and AUTO modes.
Description of four Advanced Theater settings for sound enhancement.
Explanation of DSP modes like HALL, JAZZ, DANCE, THEATER.
How to use STEREO mode for standard stereo playback.
Procedure for selecting different sound modes using the remote.
Steps for playing back sources with advanced audio formats.
Instructions for playing standard stereo audio sources.
How to select between analog, digital, and RF signal inputs.
Using DIGITAL NR to reduce extraneous noise during playback.
Feature to improve surround sound at low listening volumes.
Boosting bass and treble for music listening at low volumes.
How to adjust bass and treble frequencies for different speakers.
Using MULTI CH IN to enjoy specialized disc formats.
Information on playing back high-resolution audio formats.
Playing sound sources in their purest form without tone adjustments.
How to adjust the receiver's fluorescent display brightness.
Selecting audio channels for Dolby Digital discs with dual mono soundtracks.
Steps for tuning FM and AM radio broadcasts using automatic/manual functions.
How to tune directly to a specific radio frequency.
Procedure to store up to 30 radio stations in memory.
How to recall stored radio stations using the remote or front panel.
Assigning custom names to memorized broadcast stations.
Explanation of Radio Data System and EON information features.
How EON function automatically switches to traffic or news broadcasts.
Details on the PI function for identifying broadcast stations.
How to display RDS data like RT, PS, and PTY from broadcast stations.
How to search for radio programs based on their type.
Activating EON search for traffic announcements or news programs.
Instructions for programming the remote to control other devices.
How to recall and assign preset codes for component control.
Procedure for teaching the remote new commands.
Remote control operations for DVD and LD players.
Remote control operations for VCRs and DVD recorders.
Remote control operations for CD and CD-R players.
Remote control operations for MD recorders.
Remote control operations for satellite and cable TV tuners.
Remote control operations for controlling televisions.
Remote control operations for cassette decks.
How to record analog or digital audio signals.
How to make exact digital copies of digital audio sources.
How to record audio and video from connected VCRs.
Programming a single button for a sequence of commands.
How to use programmed Multi Operations.
Programming the receiver and components to turn off simultaneously.
How the SYSTEM OFF feature works and its limitations.
Enabling direct control of external video sources.
Adjusting or turning off the remote control's backlight.
Erasing settings stored in the remote control.
Erasing programmed Multi Operation settings.
Erasing commands learned from other remote controls.
Clearing all learned commands and preset codes from the remote.
Listening to one sound source while watching a different video source.
Explanation of Dolby Digital compression format and its application.
Details on MPEG audio encoding system for high-quality sound.
Information on DTS sound recording format and its advantages.
Explanation of THX technologies for accurate cinema sound reproduction.
Recommendation to note preset stations for easy recall.
Caution against activating DTS test mode, which erases settings.
Guide to diagnosing and resolving common operational problems and malfunctions.
Technical specifications for the receiver's amplifier section.
Technical specifications for audio inputs, outputs, and tone controls.
Technical specifications for video inputs and outputs.
Technical specifications for component video inputs and outputs.
Technical specifications for the FM tuner section.
Technical specifications for the AM tuner section.
Specifications for power requirements, dimensions, and weight.
List of parts supplied with the receiver.
To Next Page
