Pioneer XR-Q150 User Manual

4
<ARB7055>
En
CONFIRM SUPPLIED
ACCESSORIES
@) Remote control unit x 1
(2) FM T-type antenna x 1
(3) AM loop antenna x 1
({lustration shows antenna in assembled condition)
(4) AA/RGP dry cell batteries x 2
(5) @ Speaker cords x 2 (furnished with S-Q150)
@ Speaker cords x 4 (furnished with S-Q3D-LRW)
(For satellite speaker: 2)
(For sub-woofer: 2)
©) Disc case stand x 1 (included with PD-Q160F)
@ This case stand is convenient
for holding the empty cases
of discs currently loaded in
the player. By loading the
cases in the numbered slots
corresponding to the number
in the player, you can keep a
record of what discs are
loaded.
NOTE:
Some two-disc cases may not
fit in the holder.
@ Single-CD cases may be load-
ed as shown,
PUT BATTERIES INTO
THE REMOTE CONTROL UNIT
@) Open the battery compartment cover on the back of
the remote control unit.
2 Insert size AA/R6EP dry cell batteries into the battery
compartment in accordance with the indications (@,
©) inside the compartment.
(3) Close the cover of the battery case.
Incorrect use of batteries may cause leakage or rup-
ture. Always be sure to follow these guidelines:
A. Always insert batteries into the battery compart-
ment correctly matching the positive @ and nega-
tive © polarities, as shown by the display inside
the compartment.
. Never mix new and used batteries.
. Batteries of the same size may have different volt-
ages, depending on brand. Do not mix different
brands of batteries.
REMOTE CONTROL
OPERATIONS
The remote control unit can be used within a range of
about 7 meters from the remote sensor, and within
angles of up to about 30 degrees.
NOTE:
lf the remote contro! sensor window is in a position
where it receives strong light such as sunlight or fluo-
rescent light, control may not be possible.

Pioneer XR-Q150 Specifications

General

Brand	Pioneer
Model	XR-Q150
Category	Speakers
Language	English